| Description | The Cable Detector is a portable testing device for diagnosing faults in network and coaxial cables and is used for the rapid inspection of structured cabling. The Cable Detector supports shielded and unshielded twisted-pair cables of categories Cat 3, Cat 5, Cat 5e, Cat 6, Cat 6A, Cat 7, Cat 7A, asThe Cable Detector is a portable testing device for diagnosing faults in network and coaxial cables and is used for the rapid inspection of structured cabling. The Cable Detector supports shielded and unshielded twisted-pair cables of categories Cat 3, Cat 5, Cat 5e, Cat 6, Cat 6A, Cat 7, Cat 7A, as well as coaxial cables, such as those used in TV, antenna, and surveillance systems.
Testing is carried out using a two-part system consisting of a main unit and a remote unit, which also allows permanently installed cables to be tested reliably. The most important test procedures include continuity testing of the conductors (pins 1–8), wiring testing to check the correct assignment of the wire pairs, and the detection of short circuits, wiring faults, and split-pair faults. In addition, the shielding of shielded cables is checked. The test range covers cable lengths of up to 305 m, whilst the minimum cable length for split-pair detection is approximately 0.5 m.
Our Cable Detector operates using test signals transmitted between the main unit and the remote unit. The results are displayed via LED indicators. Steady LEDs indicate correct wiring, whilst flashing LEDs indicate faults in the respective wire pairs. Additional status LEDs indicate the type of fault, such as short circuit, miswiring, reversal, or split pair.
The Cable Detector is used in network technology, building cabling, and in IT and communications installations, and is designed for electricians, network technicians, and service technicians to quickly test cable runs.... Read More | The Accelerometer offers a reliable solution for monitoring vibrations in industrial machinery. The device can measure and output either acceleration, velocity, or displacement. The desired measurement parameter is conveniently set using integrated DIP switches. The device operates in the frequency The Accelerometer offers a reliable solution for monitoring vibrations in industrial machinery. The device can measure and output either acceleration, velocity, or displacement. The desired measurement parameter is conveniently set using integrated DIP switches. The device operates in the frequency range of 10 Hz to 1000 Hz and meets the requirements of ISO 2954. The measurement ranges are 0.5 to 199.9 m/s² for acceleration, 0.5 to 199.9 mm/s for velocity, and 0 to 1.999 mm for displacement. The high resolution of 0.1 m/s², 0.1 mm/s, and 0.001 mm enables precise measurement of even the smallest vibrations. Accuracy is ±5% + 2 digits under typical operating conditions.
The Accelerometer supports both RMS and peak-to-peak measurements, offering versatile analysis options. The analogue 4–20 mA interface enables easy integration into existing monitoring systems. Separate vibration measurement is carried out via a robust probe with a magnetic mount, ensuring flexible and secure attachment to the measurement object. The Accelerometer’s housing is rated to IP63, and the probe to IP60. Power is supplied via 12–30 V DC, allowing the Accelerometer to be integrated into a wide variety of industrial environments.
Thanks to zero and span adjustment, the Accelerometer can be optimally adapted to the respective measurement requirements. Operation is particularly user-friendly thanks to the compact design and ease of use. The Accelerometer is ideal for condition monitoring of machinery, preventive maintenance, and continuous process monitoring in industry. Typical applications include the monitoring of motors, pumps, fans, and other rotating machinery in production, maintenance, and quality assurance.... Read More | This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / Breathalyzer reliably measures the alcohol content in your breath.
With a measuring range of 0.00 to 0.400% BAC and a fine resolution of 0.001% BAC, the Alcohol meter / Breathalyzer delivers precise results in just a few seconds. An integrated voice output guides you step by step through the measurement. The result appears clearly legible on the LCD display, accompanied by a practical traffic light system: green: below 0.020% BAC, yellow: 0.020% - 0.080% BAC and red: from 0.080% BAC.
If a limit value is exceeded, an additional acoustic warning signal sounds. After a high measurement, the Alcohol meter / Breathalyzer automatically performs a short reset. The device has an internal memory for up to 100 measured values so that past results can be easily tracked.
The compact Alcohol meter / Breathalyzer is conveniently charged via USB-C cable and switches off automatically after around two minutes to save energy. Thanks to its simple operation, precise technology and user-friendly features, this Alcohol meter / Breathalyzer is the ideal tool for independent alcohol testing - whether at home, on the road or at work.... Read More | The Material Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read backlit display that provides clear values even in poor lighting conditions.
To assist the user, the Material Tester emits both an acoustic signal and an LED The Material Tester is a compact, portable precision tool for applications where exact torque values are crucial. It has an easy-to-read backlit display that provides clear values even in poor lighting conditions.
To assist the user, the Material Tester emits both an acoustic signal and an LED display as soon as the preset torque value is reached. Four different units of measurement (Nm, kgf-cm, lbf-ft, lbf-in) and three measuring modes - real time, peak value and preset - make it flexible to use. Automatic switch-off after a few minutes saves the batteries, and up to 999 measured values can be stored in the internal memory. The stored values can only be called up on the device.
The Material Tester is equipped with a fine-toothed ratchet head, which enables precise work even with a small radius of movement. Thanks to its robust construction made of metal and resistant plastic, it is durable and suitable for regular use. Our Material Testers are primarily used in vehicle construction, mechanical engineering, bicycle assembly and in the electrical and electronics industry. They are used to tighten bolts and nuts to a precisely defined torque in order to connect components securely and function properly without damaging them. The Material Tester is supplied in a plastic case with 2 AAA batteries.
... Read More | UV Meter / UV Tester with integrated sensor / Simultaneous measurement of UV radiation, energy and temperature / Trigger function / Storage of the highest measured value
The UV Meter / UV Tester is a high-precision measuring instrument for the simultaneous measurement of UV irradiance in the range UV Meter / UV Tester with integrated sensor / Simultaneous measurement of UV radiation, energy and temperature / Trigger function / Storage of the highest measured value
The UV Meter / UV Tester is a high-precision measuring instrument for the simultaneous measurement of UV irradiance in the range of 0 ...40000 mW/cm2, the UV energy from 0 ...999999 mJ/cm2 and the temperature in the range from -55°C ...125°C / -67 ... 257°F. With its wavelength range of 340 nm to 420 nm, it is ideal for applications in UV curing systems, UV dryers, UV LED light sources and exposure machines as well as for quality assurance of industrial UV processes in accordance with the QB/T 2826-2017 standard.
Equipped with a 1.4-inch OLED display, a high measuring rate of 2048 scans per second and a maximum recording time of 32 minutes, the UV Meter / UV Tester delivers precise, fast and reproducible measurement results. During each measurement, the highest recorded value is automatically saved as the maximum value (MAX) and clearly displayed once the measurement is complete.
In automatic mode with the UV Meter / UV Tester, the measurement can be started automatically by an individually adjustable trigger value in the range of 1 ...50 mW/cm2 can be used to start the measurement automatically. This enables targeted detection of UV irradiation precisely from the desired threshold value - ideal for reproducible measurement conditions and process monitoring. An integrated timer enables the UV curing time to be recorded precisely and displayed directly. This function is particularly useful for monitoring and documenting exposure times in time-critical UV applications, such as coating, ink and adhesive curing. This ensures that processes are carried out reproducibly and in accordance with standards.
The compact design makes the UV Meter / UV Tester particularly handy for mobile and stationary applications. The robust, heat-resistant metal housing, in combination with the heat protection cover, enables reliable operation at ambient temperatures of up to 125°C / 257°F. Stored measurement data is retained even in the event of a power failure and is automatically displayed the next time the device is switched on. The internal memory deletes old data automatically when a new measurement is started or manually by pressing and holding the SELECT button in STOP mode. Power is supplied by an integrated, rechargeable lithium battery.... Read More |