| Description | This modern Oscilloscope impresses with a real-time sampling rate of up to 1 GSa/s and an analogue bandwidth of 100 MHz per channel. It is ideal for the precise acquisition of both periodic analogue and aperiodic digital signals. Thanks to the 7-inch colour TFT LCD touchscreen with a resolution of This modern Oscilloscope impresses with a real-time sampling rate of up to 1 GSa/s and an analogue bandwidth of 100 MHz per channel. It is ideal for the precise acquisition of both periodic analogue and aperiodic digital signals. Thanks to the 7-inch colour TFT LCD touchscreen with a resolution of 800 × 480 pixels, the Oscilloscope can be operated intuitively. The slim and lightweight design makes it particularly mobile and flexible to use.
The Oscilloscope offers complete trigger functions (single/normal/automatic) and a practical one-button auto-setup function to quickly adjust signals. An integrated high-voltage protection module ensures safe measurements by tolerating continuous voltages of up to 400 V. The powerful waveform image manager also enables functions such as thumbnail view, detailed view, page turning, zooming and panning. A Lissajous graphic display for amplitude, frequency and phase analysis and an FFT view for analysing harmonics are also available, while a high-performance lithium battery with 6,000 mAh capacity enables up to four hours of continuous operation. This makes the Oscilloscope ideal for mobile use. With an internal 1 GB memory, up to 1000 screenshots and as many sets of waveform data can be saved. The data can be transferred to a computer as a file via the USB-C interface.
The scope of delivery includes two 100 MHz probes and accessories as well as a power supply unit with data cable. This makes the Oscilloscope perfect for analysing and diagnosing signal interference in circuits, power supply units or control units as well as in the development of electronic components.... Read More | The PCE-ATP 1-KIT with 100 swabs included is used to quickly and easily check the cleanliness of surfaces. The Hygiene Tester displays a measurement result on the large LC display after only 10 seconds. The Hygiene Tester's internal memory stores up to 10,000 measured data sets with time and date. The PCE-ATP 1-KIT with 100 swabs included is used to quickly and easily check the cleanliness of surfaces. The Hygiene Tester displays a measurement result on the large LC display after only 10 seconds. The Hygiene Tester's internal memory stores up to 10,000 measured data sets with time and date. The PCE-ATP 1 with the associated PCE-ATP SwapPens, allows a quick detection of food or microbiological residues on all surfaces in contact with the product as an effectiveness test of cleaning and disinfection measures. Quantitative determination of intracellular and extracellular adenosine triphosphate (ATP) is performed in the portable PCE-ATP 1. The measured data from the Hygiene Tester can be stored and further processed after the measurement. The Hygiene Tester is used in the hygiene control in pharmacy, medicine, gastronomy, wholesalers and more.... Read More | Our Cable Detector enables the precise detection and localisation of power lines, wooden beams, metals and other objects such as water-filled plastic pipes in walls, floors and ceilings. Thanks to its versatility, it can be used on various surfaces such as wood, wallpaper, plaster, acoustic walls Our Cable Detector enables the precise detection and localisation of power lines, wooden beams, metals and other objects such as water-filled plastic pipes in walls, floors and ceilings. Thanks to its versatility, it can be used on various surfaces such as wood, wallpaper, plaster, acoustic walls and painted walls.
The device is equipped with a 1.9-inch colour LCD display that provides a clear visual representation of the scan results. A signalling system consisting of coloured LEDs, acoustic cues and directional arrows quickly provides precise information about the proximity and position of the detected object. The LED system indicates green for no obstacles, yellow for nearby objects and red for an obstacle directly under the scanner. The Cable Detector has three detection modes: the metal detection mode for identifying metal objects, the wood detection mode for localising wooden beams and the power mode for detecting live wires. In the metal and power line modes, the device displays the signal strength as a percentage. In wood detection mode, the scanner recognises both the exact centre and the edges of wooden beams, allowing their position and size to be precisely determined.
To further improve the accuracy, the sensitivity can be adjusted in three stages so that the detection can be optimally adapted to the respective conditions. An integrated marking hole makes it possible to mark the drilling site immediately after detection. The Cable Detector also offers automatic calibration, which can be performed on any wall surface. The menu is available in five languages: Russian, English, Portuguese, Japanese as well as Chinese. The automatic switch-off is adjustable and can vary between 5 and 15 minutes or be deactivated completely, depending on requirements. The acoustic signal can also be switched off if required. For reliable and wireless use, the device is equipped with a powerful lithium-ion battery that can be charged quickly and easily via a USB-C port.
With this powerful and user-friendly Cable Detector, obstacles can be reliably detected and construction and renovation work can be carried out safely and efficiently.... Read More | The Environmental Meter is a versatile multiple gas detector for simultaneous monitoring of up to four gases, including combustible gases (Ex), oxygen (O?), carbon monoxide (CO) and hydrogen sulfide (H?S). Thanks to modern electrochemical and catalytic sensors, the Environmental Meter ensures high The Environmental Meter is a versatile multiple gas detector for simultaneous monitoring of up to four gases, including combustible gases (Ex), oxygen (O?), carbon monoxide (CO) and hydrogen sulfide (H?S). Thanks to modern electrochemical and catalytic sensors, the Environmental Meter ensures high measurement accuracy of ? ±5% of the final value and delivers reliable results even under demanding environmental conditions. The Environmental Meter has an easy-to-read LCD display with backlighting that clearly shows real-time measurements, system status, date, time and battery level. If the preset alarm limits are exceeded, the device immediately warns the user with visual, audible and vibration alarms. The alarm parameters – including low and high thresholds as well as STEL and TWA limits – can be individually adjusted to meet specific operational requirements and legal specifications.
In addition to classic measurement mode, the Environmental Meter offers extensive additional functions such as self-test, zero and multi-point calibration, and an internal memory for alarm and measurement events. This also makes it suitable for documenting occupational safety measures and for test reports. The intuitive menu navigation via an ergonomic keypad allows for easy operation even when wearing protective gloves.
The integrated Li-ion battery provides up to 8 hours of operation and can be quickly recharged. The robust housing made of impact-resistant plastic with non-slip rubber coating is dustproof and waterproof in accordance with IP66 and designed for harsh industrial environments. In addition, the Environmental Meter meets the requirements of explosion protection class Ex ib IIB T3 Gb and is therefore suitable for use in potentially explosive atmospheres.
Thanks to its compact design and low weight, the Environmental Meter can be conveniently worn on a belt or work clothing. It is ideal for mobile use during maintenance work, in confined spaces (e.g. containers or shafts), during inspection rounds and in emergency and rescue operations.
Typical areas of application for the Environmental Meter include industry, mining, sewage treatment plants, energy suppliers, chemical and petrochemical production, waste management, utility companies, fire brigades and technical emergency services. Wherever hazardous or explosive gas atmospheres may occur, the Environmental Meter offers reliable protection for employees and equipment and contributes significantly to compliance with occupational health and safety regulations.... Read More | The cordless Soldering iron / Soldering device with 8 watts of power impresses with its fast heat-up time of approx. 20 seconds and reaches temperatures of up to 480°C/896°F - ideal for precise soldering work on the go or in hard-to-reach places. Thanks to its ergonomic design, the The cordless Soldering iron / Soldering device with 8 watts of power impresses with its fast heat-up time of approx. 20 seconds and reaches temperatures of up to 480°C/896°F - ideal for precise soldering work on the go or in hard-to-reach places. Thanks to its ergonomic design, the cordless Soldering iron / Soldering device iron sits comfortably in the hand and allows you to work comfortably.
With an operating time of approx. 1 hour and a powerful 1800 mAh lithium battery, the cordless Soldering iron / Soldering device is the perfect companion for mobile applications. The integrated battery level indicator ensures that the charge status is always visible. Two integrated LEDs also ensure optimum illumination of the soldering point. The charging time is only around 1.5 hours - so the cordless soldering iron is quickly ready for use again.
... Read More |