| Description | The Voltmeter is a practical and versatile meter that can be used in many areas such as electronics, electrical engineering and DIY. The Voltmeter enables the measurement of DC and AC voltage, resistance, capacitance, frequency and temperature. With True RMS technology, it can also accurately The Voltmeter is a practical and versatile meter that can be used in many areas such as electronics, electrical engineering and DIY. The Voltmeter enables the measurement of DC and AC voltage, resistance, capacitance, frequency and temperature. With True RMS technology, it can also accurately measure complex AC voltages.
The live test function indicates whether a circuit is energised using only a test tip. The NCV (Non-Contact Voltage) function helps to detect live wires without direct contact. The Voltmeter also offers a diode test which can be used to check the functionality of diodes, as well as a continuity test. The multimeter is barely thicker than a smartphone, making it easy to transport and store.
The Voltmeter is powered by a rechargeable lithium battery that boasts a long service life and reliable performance. It has an automatic power-off function after 10 minutes to extend battery life. Thanks to its compact design, the device is easy to transport and can be used in hard-to-reach areas. The 3.3-inch LC display ensures clear and easy-to-read values, while the integrated torch is useful in dark environments.... Read More | The Environmental Meter is a versatile multiple gas detector for simultaneous monitoring of up to four gases, including combustible gases (Ex), oxygen (O?), carbon monoxide (CO) and hydrogen sulfide (H?S). Thanks to modern electrochemical and catalytic sensors, the Environmental Meter ensures high The Environmental Meter is a versatile multiple gas detector for simultaneous monitoring of up to four gases, including combustible gases (Ex), oxygen (O?), carbon monoxide (CO) and hydrogen sulfide (H?S). Thanks to modern electrochemical and catalytic sensors, the Environmental Meter ensures high measurement accuracy of ? ±5% of the final value and delivers reliable results even under demanding environmental conditions. The Environmental Meter has an easy-to-read LCD display with backlighting that clearly shows real-time measurements, system status, date, time and battery level. If the preset alarm limits are exceeded, the device immediately warns the user with visual, audible and vibration alarms. The alarm parameters – including low and high thresholds as well as STEL and TWA limits – can be individually adjusted to meet specific operational requirements and legal specifications.
In addition to classic measurement mode, the Environmental Meter offers extensive additional functions such as self-test, zero and multi-point calibration, and an internal memory for alarm and measurement events. This also makes it suitable for documenting occupational safety measures and for test reports. The intuitive menu navigation via an ergonomic keypad allows for easy operation even when wearing protective gloves.
The integrated Li-ion battery provides up to 8 hours of operation and can be quickly recharged. The robust housing made of impact-resistant plastic with non-slip rubber coating is dustproof and waterproof in accordance with IP66 and designed for harsh industrial environments. In addition, the Environmental Meter meets the requirements of explosion protection class Ex ib IIB T3 Gb and is therefore suitable for use in potentially explosive atmospheres.
Thanks to its compact design and low weight, the Environmental Meter can be conveniently worn on a belt or work clothing. It is ideal for mobile use during maintenance work, in confined spaces (e.g. containers or shafts), during inspection rounds and in emergency and rescue operations.
Typical areas of application for the Environmental Meter include industry, mining, sewage treatment plants, energy suppliers, chemical and petrochemical production, waste management, utility companies, fire brigades and technical emergency services. Wherever hazardous or explosive gas atmospheres may occur, the Environmental Meter offers reliable protection for employees and equipment and contributes significantly to compliance with occupational health and safety regulations.... Read More | Laboratory Technology for liquids up to 5 l / Stirring speed up to 1600 rpm / Adjustable direction of rotation / Programme mode: up to 6 stirring programmes / 1 stirring position
The Laboratory Technology is an easy-to-use laboratory device that is used for the efficient mixing of liquids. With a 3Laboratory Technology for liquids up to 5 l / Stirring speed up to 1600 rpm / Adjustable direction of rotation / Programme mode: up to 6 stirring programmes / 1 stirring position
The Laboratory Technology is an easy-to-use laboratory device that is used for the efficient mixing of liquids. With a 3.7 inch LCD display and user-friendly controls, the stirring speed, stirring time and direction of rotation can be customized. The stirring speed can be set within a range of 100 ... 1,600 rpm and has an accuracy of ± 10 rpm.
Our Laboratory Technology automatically saves the last set working parameters and up to six individually programmed stirring cycles. This enables a quick restart with the desired settings. The stirrer also has an integrated timer that allows precise time control from one second to 99 hours and 59 minutes.
The use of a brushless motor ensures maintenance-free and quiet operation. The robust acrylic stirring plate measuring 173 × 180 mm provides a stable base for a wide range of stirring tasks, even for longer operating times. The Laboratory Technology can process liquid volumes up to a maximum of 5 litres and is operated via a power supply of AC 100 ... 240V at 50 Hz.
It is a good solution for laboratory work where reliable and reproducible mixing without heating is required. It impresses with its robust design and easy handling in research facilities and industrial laboratories.... Read More | The Material Tester is a high-precision testing device for calibrating and checking the function of torque spanners in industrial and technical applications. Developed for professional use, the Material Tester enables the reliable measurement of torques of up to 500 Nm and is therefore ideal for useThe Material Tester is a high-precision testing device for calibrating and checking the function of torque spanners in industrial and technical applications. Developed for professional use, the Material Tester enables the reliable measurement of torques of up to 500 Nm and is therefore ideal for use in the automotive industry, in mechanical engineering and in research and development.
With the option of switching between real-time and peak value mode, the Material Tester offers flexible handling and maximum control when analyzing measurement results. The limit value function warns on the display if defined values are exceeded or not reached, which increases safety and quality assurance in the work process with the Material Tester.
The measurement results are displayed in various units such as Nm, kgf cm or lbf in and can be saved internally. Up to 99 measured values can be stored in the device and called up as required. With a measuring accuracy of ±1 %, the Material Tester guarantees reliable results even in demanding applications.
Different model variants of the Material Tester cover a wide range of torque ranges and offer a robust design and user-friendly operating interfaces. This makes the Material Tester the ideal solution for precise and efficient testing processes in a professional environment.... Read More | The digital Nut Runner combines state-of-the-art technology with a robust design and guarantees maximum precision for a wide range of assembly tasks. With its three intelligent operating modes, comprehensive protective functions and practical replaceable battery pack, this Nut Runner is the ideal The digital Nut Runner combines state-of-the-art technology with a robust design and guarantees maximum precision for a wide range of assembly tasks. With its three intelligent operating modes, comprehensive protective functions and practical replaceable battery pack, this Nut Runner is the ideal solution for industrial, workshop and assembly applications.
In torque mode, the desired torque can be set quickly and continuously. The value can be conveniently adjusted using the operating buttons and the screwdriving process begins with a simple pull of the trigger. Angle mode enables controlled tightening not only via the torque, but also via the angle of rotation - perfect for applications that require maximum precision. In addition, Point Mode offers up to six memorizable presets for frequently used torque values. These can be individually configured and called up at the touch of a button during operation - ideal for recurring assembly tasks.
Other highlights of the torque screwdriver include precise torque adjustment with high repeat accuracy, a multi-stage gearbox for reliable power transmission and alarm and monitoring functions that help the user to assess the tightening result. Integrated protective functions such as temperature monitoring prevent overheating and extend the service life of the tool. Thanks to the replaceable battery, uninterrupted work is also guaranteed. Another highlight is the software supplied, which can be used to conveniently read out all the recorded screwdriving data. This allows users to document and analyze torque values, results and process data. The software also allows centralized settings to be made directly on the device.
The Nut Runner is ideal for precise screw connections in mechanical and plant engineering. It also ensures reliable results when assembling wind turbines and steel structures. In the automotive sector, it is an indispensable tool for maintenance and repairs. It can also be used in a wide range of applications in heavy industry and construction.... Read More |