| Description | The Voltmeter is a practical and versatile meter that can be used in many areas such as electronics, electrical engineering and DIY. The Voltmeter enables the measurement of DC and AC voltage, resistance, capacitance, frequency and temperature. With True RMS technology, it can also accurately The Voltmeter is a practical and versatile meter that can be used in many areas such as electronics, electrical engineering and DIY. The Voltmeter enables the measurement of DC and AC voltage, resistance, capacitance, frequency and temperature. With True RMS technology, it can also accurately measure complex AC voltages.
The live test function indicates whether a circuit is energised using only a test tip. The NCV (Non-Contact Voltage) function helps to detect live wires without direct contact. The Voltmeter also offers a diode test which can be used to check the functionality of diodes, as well as a continuity test. The multimeter is barely thicker than a smartphone, making it easy to transport and store.
The Voltmeter is powered by a rechargeable lithium battery that boasts a long service life and reliable performance. It has an automatic power-off function after 10 minutes to extend battery life. Thanks to its compact design, the device is easy to transport and can be used in hard-to-reach areas. The 3.3-inch LC display ensures clear and easy-to-read values, while the integrated torch is useful in dark environments.... Read More | This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / This Alcohol meter / Breathalyzer is perfect for personally checking your alcohol level - for example after consuming alcoholic drinks at parties, when driving the next morning or for general health monitoring. It is very easy to use: by briefly blowing into the device, the Alcohol meter / Breathalyzer reliably measures the alcohol content in your breath.
With a measuring range of 0.00 to 0.400% BAC and a fine resolution of 0.001% BAC, the Alcohol meter / Breathalyzer delivers precise results in just a few seconds. An integrated voice output guides you step by step through the measurement. The result appears clearly legible on the LCD display, accompanied by a practical traffic light system: green: below 0.020% BAC, yellow: 0.020% - 0.080% BAC and red: from 0.080% BAC.
If a limit value is exceeded, an additional acoustic warning signal sounds. After a high measurement, the Alcohol meter / Breathalyzer automatically performs a short reset. The device has an internal memory for up to 100 measured values so that past results can be easily tracked.
The compact Alcohol meter / Breathalyzer is conveniently charged via USB-C cable and switches off automatically after around two minutes to save energy. Thanks to its simple operation, precise technology and user-friendly features, this Alcohol meter / Breathalyzer is the ideal tool for independent alcohol testing - whether at home, on the road or at work.... Read More | Geiger Counter / Measurement of beta, gamma and X-rays / Adjustable limit values / Progression diagram / Minimum, maximum and average values / Internal memory with PC transfer via software
The Geiger Counter is a portable device mainly used for monitoring X, ? and ß radiation. The Geiger Counter isGeiger Counter / Measurement of beta, gamma and X-rays / Adjustable limit values / Progression diagram / Minimum, maximum and average values / Internal memory with PC transfer via software
The Geiger Counter is a portable device mainly used for monitoring X, ? and ß radiation. The Geiger Counter is equipped with a glass Geiger-Müller counter tube (GM tube), which is known for its high measurement accuracy and sensitivity, and has a 2.4-inch TFT LCD display.
The Geiger Counter offers audible, visual and vibration alarms with customizable dose rate and total dose limits. It enables simultaneous real-time measurement of the dose rate and recording of the cumulative dose over a set period of time. In addition, the device displays the minimum, maximum and average values of the measurements.
The supplied software enables live measurement and data transfer from the internal memory. Thanks to its compact design, energy efficiency and versatility, the Geiger Counter is ideal for both professional and private use.... Read More | Radiation Detector / measurement of gamma, beta and X-rays / adjustable alarm values / numerical and graphical display / min, max and average values
Our Radiation Detector is mainly used to measure gamma, beta and X-rays and uses a Geiger-Müller counter to measure the intensity of ionising Radiation Detector / measurement of gamma, beta and X-rays / adjustable alarm values / numerical and graphical display / min, max and average values
Our Radiation Detector is mainly used to measure gamma, beta and X-rays and uses a Geiger-Müller counter to measure the intensity of ionising radiation. The measuring range extends from 0 ... 10 mSv/h. The cumulative dose, average and maximum dose are shown on the larg 2.3 inch multifunctional display, while the real-time measurements are also shown graphically.
The device has two alarm modes: the radiation alarm (0 ... 100 µSv/h) and the cumulative radiation alarm (0 ... 100 mSv). Both alarms are equipped with different settings for visual, audible and vibrating warning signals. The energy range of the device is between 48 and 1500 keV. The radiation measuring device is equipped with a micro USB interface and a rechargeable lithium battery.
The Radiation Detector also displays the current battery level so that the user is always informed. The brightness of the display can be adjusted as required so that it is easier to read even in different lighting conditions. The date and time are also shown on the display.
This Radiation Detector is ideal for applications in research, medicine, industry and environmental protection. It can be used in nuclear power stations, hospitals, laboratories, radiation monitoring and emergency scenarios. Furthermore, it is also useful for construction companies that are working with radioactive materials and in environmental monitoring to ensure that radiation exposure remains within safe limits.... Read More | The Voltmeter is a practical multimeter that is used to analyze the power supply, power consumption and charging performance of electronic devices. With its USB-A and USB-C inputs and outputs, it is compatible with a wide range of chargers, smartphones and other USB-powered devices.
The 1.06-inch TFTThe Voltmeter is a practical multimeter that is used to analyze the power supply, power consumption and charging performance of electronic devices. With its USB-A and USB-C inputs and outputs, it is compatible with a wide range of chargers, smartphones and other USB-powered devices.
The 1.06-inch TFT LCD display shows the measurement results clearly and concisely, allowing detailed monitoring of the performance data. A special feature of the USB multimeter is the graphical measurement curve, which displays voltage and current in real time. The Voltmeter precisely measures the applied voltage and current, which allows conclusions to be drawn about the quality of the power supply. This is particularly useful for diagnosing charging problems or evaluating the actual charging performance of various power supply units, power banks and cables.
Thanks to its compact design and user-friendly handling, the Voltmeter is suitable for both professional and private use. The combination of USB-A and USB-C ports makes it an indispensable tool for anyone who wants to reliably test their chargers and power sources. With the Voltmeter , measurements can be carried out quickly and precisely to ensure an optimum power supply.... Read More |