| Description | This Oscilloscope was developed for mobile use and for quick signal analyses in the workshop, laboratory or on site. It records voltages in the range from -400V ... +400V, depending on the selected mode (X1 or X10, switchable directly on the device). It offers a vertical sensitivity of 10 mV/div ...This Oscilloscope was developed for mobile use and for quick signal analyses in the workshop, laboratory or on site. It records voltages in the range from -400V ... +400V, depending on the selected mode (X1 or X10, switchable directly on the device). It offers a vertical sensitivity of 10 mV/div ... 10V/div in X1 mode and 100 mV/div ... 100V/div in X10 mode. The measurement is carried out using the crocodile clips supplied. With a time base of 10 µs ... 500 s/div, a bandwidth of 200 kHz and a sampling rate of 2.5 MS/s, the Oscilloscope enables reliable and precise visualization of electrical signals.
For efficient signal processing, waveforms can be paused and selectively shifted - for example to detect interference or to analyze complex modulation processes. The automatic measurement function records signal parameters such as frequency, period duration, effective value (RMS), average value (AVG), maximum and minimum voltage as well as the peak-to-peak value. An adjustable trigger voltage ensures a stable display. DC and AC voltages can be viewed separately via a switchable coupling. An integrated calibration signal output with 1 kHz and 50% duty cycle is available for checking test leads or probes.
A high-resolution 2.8-inch color display clearly shows the waveform. Power is supplied by a 1000 mAh lithium battery, which is charged via USB-C (5V/1A). Automatic switch-off after 30 minutes increases energy efficiency in mobile operation. With its compact dimensions, the Oscilloscope is ideal for flexible use in the field, in training or as a handy diagnostic tool in the electrical workshop. The Oscilloscope combines precision, mobility and functionality in one compact device.
... Read More | The Alcohol meter / Breathalyzer enables reliable measurement in the range of 0 ... 400 mg/100 ml with an accuracy of ±10 mg/100 ml. Measurement results are available in approx. 5 seconds and are clearly displayed on a 0.96 inch color LCD display. Various units are supported, including mg/l, mgThe Alcohol meter / Breathalyzer enables reliable measurement in the range of 0 ... 400 mg/100 ml with an accuracy of ±10 mg/100 ml. Measurement results are available in approx. 5 seconds and are clearly displayed on a 0.96 inch color LCD display. Various units are supported, including mg/l, mg/100ml, µg/100ml, mg/ml and g/100ml. The measurement results are displayed numerically and additionally supplemented by a colored traffic light display: green for values below 20 mg/100 ml, yellow for values between 20 and 80 mg/100 ml and red from 80 mg/100 ml. The measurement is carried out using a uniform breath sample with a puff duration of 2.5 seconds and an air flow of at least 20 liters per minute.
The breathalyser automatically saves the measurement results in the internal memory - including the date and time of each measurement. The integrated lithium battery is charged via a USB-C interface. The device is suitable for operation in a temperature range from -5°C to 40°C / 23 to 104°F. With a resolution of 0.001 mg/L and a repeatability of ±6%, the Alcohol meter / Breathalyzer offers precise and fast breath alcohol measurement.
Thanks to its compact design, dimensions and low weight, the Alcohol meter / Breathalyzer is particularly handy, easy to transport and ideal for mobile use. It is ideal for private use to check your own alcohol level before driving a vehicle. It is also used in companies to ensure the work ability and safety of employees, in security services to check staff and visitors and at events to ensure an alcohol-free environment. Thanks to the precise measurement results, the breathalyser effectively helps to prevent accidents and legal consequences caused by alcohol consumption.... Read More | The Environmental Meter offers a reliable and precise solution for measuring liquid levels in a wide variety of applications. With a measuring range of 0 to 8 m / 0 … 26.2 ft H?O, the level gauge is ideally suited for use in deep wells, rivers, lakes, canals, reservoirs, and coastal monitoringThe Environmental Meter offers a reliable and precise solution for measuring liquid levels in a wide variety of applications. With a measuring range of 0 to 8 m / 0 … 26.2 ft H?O, the level gauge is ideally suited for use in deep wells, rivers, lakes, canals, reservoirs, and coastal monitoring applications up to a water depth of 8 m / 26.2 ft. The high accuracy of ±0.5% FS ensures precise measurement results even under demanding conditions. Thanks to its robust design with a stainless steel housing and durable cable material, the Environmental Meter is resistant to abrasion, oil, acids, and alkalis.
The flexible submersible installation allows for use in both static and flowing media. The long-term stability of ±0.2% FS per year ensures consistently reliable measurement results. The display is operated with a supply voltage of 24 V DC and is designed for connection to sensors with a 4–20 mA output signal. It also features a 4–20 mA analogue output, which enables easy processing of the measured values in higher-level control systems.
Four alarm relays (ALL, AL, AH, AHH) are available for monitoring limit values, allowing individual switching points to be set for different liquid levels. All settings can be conveniently adjusted directly via the control buttons on the display, ensuring quick and easy commissioning. The Environmental Meter is ideally suited for applications in water management, wastewater treatment, irrigation, water diversion, and industrial liquid monitoring.... Read More | The Force Sensor enables the precise measurement of tensile stress in filaments and linear materials. This handy digital Force Sensor offers three freely selectable operating modes: real-time, hold, and peak value. It supports five different units of measurement (cN, oz, kgf, N, lb) and achieves a The Force Sensor enables the precise measurement of tensile stress in filaments and linear materials. This handy digital Force Sensor offers three freely selectable operating modes: real-time, hold, and peak value. It supports five different units of measurement (cN, oz, kgf, N, lb) and achieves a measurement accuracy of ±2.5% FS.
The Force Sensor is equipped with an integrated USB interface, which enables convenient data communication. Recorded data sets can be transferred to PC software for further processing and exported as an XLSX file. A total of up to 41 data groups can be stored on the Force Sensor, which supports systematic process control.
Thanks to variable thickness adjustment and a measuring head width of 65 mm, the Force Sensor offers high flexibility for a variety of applications. The Force Sensor is widely used in the wire and cable industry, the textile and chemical fiber industry, the metal wire and carbon fiber industry, as well as in many other sectors.
This Force Sensor impresses with its ease of use, precise measurement results, and versatile applications, making it the ideal solution for professional measurement tasks. The Force Sensor is powered by 2 AA batteries, which can be charged using the supplied mains adapter.... Read More | The digital Nut Runner combines state-of-the-art technology with a robust design and guarantees maximum precision for a wide range of assembly tasks. With its three intelligent operating modes, comprehensive protective functions and practical replaceable battery pack, this Nut Runner is the ideal The digital Nut Runner combines state-of-the-art technology with a robust design and guarantees maximum precision for a wide range of assembly tasks. With its three intelligent operating modes, comprehensive protective functions and practical replaceable battery pack, this Nut Runner is the ideal solution for industrial, workshop and assembly applications.
In torque mode, the desired torque can be set quickly and continuously. The value can be conveniently adjusted using the operating buttons and the screwdriving process begins with a simple pull of the trigger. Angle mode enables controlled tightening not only via the torque, but also via the angle of rotation - perfect for applications that require maximum precision. In addition, Point Mode offers up to six memorizable presets for frequently used torque values. These can be individually configured and called up at the touch of a button during operation - ideal for recurring assembly tasks.
Other highlights of the torque screwdriver include precise torque adjustment with high repeat accuracy, a multi-stage gearbox for reliable power transmission and alarm and monitoring functions that help the user to assess the tightening result. Integrated protective functions such as temperature monitoring prevent overheating and extend the service life of the tool. Thanks to the replaceable battery, uninterrupted work is also guaranteed. Another highlight is the software supplied, which can be used to conveniently read out all the recorded screwdriving data. This allows users to document and analyze torque values, results and process data. The software also allows centralized settings to be made directly on the device.
The Nut Runner is ideal for precise screw connections in mechanical and plant engineering. It also ensures reliable results when assembling wind turbines and steel structures. In the automotive sector, it is an indispensable tool for maintenance and repairs. It can also be used in a wide range of applications in heavy industry and construction.... Read More |