| Description | Our robust socket square inserts are specially designed for use with impact wrenches and are ideal for demanding bolting applications. The range covers thread sizes from M16 to M48 and offers the right wrench sizes for a wide variety of applications.
These high-quality socket square inserts impress Our robust socket square inserts are specially designed for use with impact wrenches and are ideal for demanding bolting applications. The range covers thread sizes from M16 to M48 and offers the right wrench sizes for a wide variety of applications.
These high-quality socket square inserts impress with their high load-bearing capacity, precise fit, and long service life – perfect for professional use in industry and assembly.... Read More | The PM2.5 particulate matter monitor PCE-RCM 05 is used to continuously measure the particulate matter content at the workplace. The PCE-RCM 05 PM2.5 monitor displays PM2.5 particulate matter as well as temperature and humidity on the display. The measuring range of the PCE-RCM 05 monitor ranges The PM2.5 particulate matter monitor PCE-RCM 05 is used to continuously measure the particulate matter content at the workplace. The PCE-RCM 05 PM2.5 monitor displays PM2.5 particulate matter as well as temperature and humidity on the display. The measuring range of the PCE-RCM 05 monitor ranges from 0 ... 500 µg / m³ PM2.5. This makes the PM2.5 meter an optimal test instrument to constantly have an overview of the fine dust content. Below the large measured value display of the PM2.5 content, the PM2.5 monitor provides quick information about the air quality with the aid of pictograms.
The PCE-RCM 05 fine dust monitor is powered by a rechargeable battery. The LC display is illuminated and easy to read from any angle, for example when the meter is on a desk. In addition to the standard white lighting, the PM2.5 monitor switches the lighting to red in the event of an alarm.... Read More | This Oscilloscope was developed for mobile use and for quick signal analyses in the workshop, laboratory or on site. It records voltages in the range from -400V ... +400V, depending on the selected mode (X1 or X10, switchable directly on the device). It offers a vertical sensitivity of 10 mV/div ...This Oscilloscope was developed for mobile use and for quick signal analyses in the workshop, laboratory or on site. It records voltages in the range from -400V ... +400V, depending on the selected mode (X1 or X10, switchable directly on the device). It offers a vertical sensitivity of 10 mV/div ... 10V/div in X1 mode and 100 mV/div ... 100V/div in X10 mode. The measurement is carried out using the crocodile clips supplied. With a time base of 10 µs ... 500 s/div, a bandwidth of 200 kHz and a sampling rate of 2.5 MS/s, the Oscilloscope enables reliable and precise visualization of electrical signals.
For efficient signal processing, waveforms can be paused and selectively shifted - for example to detect interference or to analyze complex modulation processes. The automatic measurement function records signal parameters such as frequency, period duration, effective value (RMS), average value (AVG), maximum and minimum voltage as well as the peak-to-peak value. An adjustable trigger voltage ensures a stable display. DC and AC voltages can be viewed separately via a switchable coupling. An integrated calibration signal output with 1 kHz and 50% duty cycle is available for checking test leads or probes.
A high-resolution 2.8-inch color display clearly shows the waveform. Power is supplied by a 1000 mAh lithium battery, which is charged via USB-C (5V/1A). Automatic switch-off after 30 minutes increases energy efficiency in mobile operation. With its compact dimensions, the Oscilloscope is ideal for flexible use in the field, in training or as a handy diagnostic tool in the electrical workshop. The Oscilloscope combines precision, mobility and functionality in one compact device.
... Read More | The cordless Soldering iron / Soldering device with 8 watts of power impresses with its fast heat-up time of approx. 20 seconds and reaches temperatures of up to 480°C/896°F - ideal for precise soldering work on the go or in hard-to-reach places. Thanks to its ergonomic design, the The cordless Soldering iron / Soldering device with 8 watts of power impresses with its fast heat-up time of approx. 20 seconds and reaches temperatures of up to 480°C/896°F - ideal for precise soldering work on the go or in hard-to-reach places. Thanks to its ergonomic design, the cordless Soldering iron / Soldering device iron sits comfortably in the hand and allows you to work comfortably.
With an operating time of approx. 1 hour and a powerful 1800 mAh lithium battery, the cordless Soldering iron / Soldering device is the perfect companion for mobile applications. The integrated battery level indicator ensures that the charge status is always visible. Two integrated LEDs also ensure optimum illumination of the soldering point. The charging time is only around 1.5 hours - so the cordless soldering iron is quickly ready for use again.
... Read More | UV Meter / UV Tester with integrated sensor / Simultaneous measurement of UV radiation, energy and temperature / Trigger function / Storage of the highest measured value
The UV Meter / UV Tester is a high-precision measuring instrument for the simultaneous measurement of UV irradiance in the range UV Meter / UV Tester with integrated sensor / Simultaneous measurement of UV radiation, energy and temperature / Trigger function / Storage of the highest measured value
The UV Meter / UV Tester is a high-precision measuring instrument for the simultaneous measurement of UV irradiance in the range of 0 ...40000 mW/cm2, the UV energy from 0 ...999999 mJ/cm2 and the temperature in the range from -55°C ...125°C / -67 ... 257°F. With its wavelength range of 340 nm to 420 nm, it is ideal for applications in UV curing systems, UV dryers, UV LED light sources and exposure machines as well as for quality assurance of industrial UV processes in accordance with the QB/T 2826-2017 standard.
Equipped with a 1.4-inch OLED display, a high measuring rate of 2048 scans per second and a maximum recording time of 32 minutes, the UV Meter / UV Tester delivers precise, fast and reproducible measurement results. During each measurement, the highest recorded value is automatically saved as the maximum value (MAX) and clearly displayed once the measurement is complete.
In automatic mode with the UV Meter / UV Tester, the measurement can be started automatically by an individually adjustable trigger value in the range of 1 ...50 mW/cm2 can be used to start the measurement automatically. This enables targeted detection of UV irradiation precisely from the desired threshold value - ideal for reproducible measurement conditions and process monitoring. An integrated timer enables the UV curing time to be recorded precisely and displayed directly. This function is particularly useful for monitoring and documenting exposure times in time-critical UV applications, such as coating, ink and adhesive curing. This ensures that processes are carried out reproducibly and in accordance with standards.
The compact design makes the UV Meter / UV Tester particularly handy for mobile and stationary applications. The robust, heat-resistant metal housing, in combination with the heat protection cover, enables reliable operation at ambient temperatures of up to 125°C / 257°F. Stored measurement data is retained even in the event of a power failure and is automatically displayed the next time the device is switched on. The internal memory deletes old data automatically when a new measurement is started or manually by pressing and holding the SELECT button in STOP mode. Power is supplied by an integrated, rechargeable lithium battery.... Read More |