| Description | The Clamp Meter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating and direct current that can be measured without direct contact to the line. The Clamp Meter is suitable for measuring resistance, temperature, diodes, continuity, The Clamp Meter is a multifunctional meter for the precise measurement of alternating and direct voltage as well as alternating and direct current that can be measured without direct contact to the line. The Clamp Meter is suitable for measuring resistance, temperature, diodes, continuity, frequencies and capacitance and is particularly useful for diagnosing electrical and electronic components.
For maximum measurement accuracy, the Clamp Meter supports True RMS for non-sinusoidal waveforms and a Low Impedance (LoZ) function to reduce interference. The non-contact voltage test enables reliable detection of voltages in cables and sockets.
The 2-inch LC display ensures clear readability, even under poor lighting conditions and an integrated LED torch makes it easier to work in dark environments. The device also offers automatic and manual measurement range selection, allowing it to be flexibly adapted to different measuring situations. The device also has a practical zero key which enables accurate measurement of low currents, especially when measuring direct current (DC) and ensures the compensation of deviations of the output value. Other functions include overload protection, data hold, min, max and an automatic power-off after 15 minutes to conserve battery life. The power-off can also be deactivated for longer measurements.
Compact and easy to use, the Clamp Meter is ideal for electrical installations, maintenance work and use in automation technology. It enables safe and efficient measurements, often without direct intervention in the circuit.... Read More | The state-of-the-art Clamp Meter enables precise and comprehensive measurements in the areas of current, voltage, frequency, power, energy flicker and harmonics. It has been specially developed to provide reliable data both in industrial applications and when analyzing photovoltaic or inverter The state-of-the-art Clamp Meter enables precise and comprehensive measurements in the areas of current, voltage, frequency, power, energy flicker and harmonics. It has been specially developed to provide reliable data both in industrial applications and when analyzing photovoltaic or inverter systems.
Simultaneous monitoring of all three phases and the neutral conductor provides a complete picture of the electrical system. The efficiency measurement of inverters allows a detailed analysis of the energy conversion, while the grid signal monitoring continuously detects deviations and faults. This Clamp Meter is therefore an indispensable tool for professional energy analyses.
Thanks to modern communication interfaces such as Wifi, the Clamp Meter can be easily integrated into existing systems and enables wireless analysis of measurement data. The integrated logger function and the memory reliably save all relevant data for later analysis.
An integrated oscilloscope function allows the visual display of signal curves, including inrush currents, and thus supports the analysis of transient phenomena. The 7.8-inch touch display ensures intuitive operation and a clear presentation of all measured values, diagrams and analysis functions. The Clamp Meter fulfils the requirements of IEC 61000-4-30 Class A and thus guarantees standard-compliant analysis of the power quality parameters.
This Clamp Meter combines precision, versatility and modern user-friendliness and is ideal for energy analyses, fault diagnostics and efficiency tests in complex electrical systems.... Read More | The Force Gage is used to precisely check the tension of belts in machines and systems, thereby ensuring optimum power transmission. This Force Gage measures the oscillation frequency of the belt and immediately calculates the belt tension, which is displayed directly in newtons. The measuring rangeThe Force Gage is used to precisely check the tension of belts in machines and systems, thereby ensuring optimum power transmission. This Force Gage measures the oscillation frequency of the belt and immediately calculates the belt tension, which is displayed directly in newtons. The measuring range is between 10 and 680 Hz, with an accuracy of ±1 Hz for frequencies below 100 Hz and ±1% for frequencies above 100 Hz, with a total error of less than 5%.
Special features of the device include the flexible gooseneck sensor for hard-to-reach areas and the option to directly enter the belt length, belt mass and belt width (max. 999.9 mm), which makes the calculation of the belt tension particularly precise. The Force Gage can be switched between displaying the oscillation frequency in Hz and the calculated belt tension in N. It is powered by 3 × AA batteries, making it flexible to use.
This Force Gage is primarily used in the maintenance of conveyor systems, mechanical engineering, the automotive industry and wherever belts need to be tensioned precisely to ensure the performance, safety and service life of the equipment.... Read More | Radiation Detector for indoor use / E-paper display 1.54 inch / Short-term and long-term average / Colorful radon value display
The Radiation Detector is a compact and handy measuring device for precise monitoring of the radon concentration indoors. With a measuring range of 0 ... 9999 Bq/m³ and a Radiation Detector for indoor use / E-paper display 1.54 inch / Short-term and long-term average / Colorful radon value display
The Radiation Detector is a compact and handy measuring device for precise monitoring of the radon concentration indoors. With a measuring range of 0 ... 9999 Bq/m³ and a semiconductor detector, the Radiation Detector provides reliable measured values after just one hour. It provides both short-term average values (updated hourly) and long-term average values (updated every 24 hours up to 1 year) for a detailed analysis of radon exposure. These values are stored in the device and updated regularly. After a battery change or by pressing the reset button, all stored data is deleted and the monitor is reset to the original measured value.
The e-paper display shows the values in Bq/m³ or pCi/L, depending on the selected unit, which can be set by the user. The device has an audible and visual alarm with colour coding: Green for values below 100 Bq/m³ (safe), yellow for values between 100 and 150 Bq/m³ (low exposure) and red for values above 150 Bq/m³ (high exposure).
With its dimensions of 103 x 103 x 33 mm, the Radiation Detector is particularly compact and can be set up or hung up. It is powered by AAA batteries and is therefore mobile and flexible in use. This makes the Radiation Detector ideal for use in residential, office, school and industrial buildings for fast and reliable monitoring of radon levels.... Read More | The Sound Sensor is ideal for all applications where ambient noise or noise levels need to be monitored precisely. Whether in urban noise measurement stations, on factory floors, in schools or in research projects - this Sound Sensor provides reliable measured values to fulfil safety and comfort The Sound Sensor is ideal for all applications where ambient noise or noise levels need to be monitored precisely. Whether in urban noise measurement stations, on factory floors, in schools or in research projects - this Sound Sensor provides reliable measured values to fulfil safety and comfort requirements. The sensor covers a measuring range of 30 ... 120 dBA and operates in the frequency range from 20 ... 12500 Hz. The resolution is typically 1 dB, which is sufficient for most practical applications, while the accuracy is ±2% of the measuring range plus ±0.5 dB, based on the reference tone of 94 dB at 1 kHz. The Sound Sensor therefore provides a precise and reliable basis for all acoustic measurements.
The specific technical features include a digital interface via RS-485 with Modbus RTU, which enables easy integration into existing systems. The sensor utilizes a high-quality condenser microphone with A-weighting, which takes into account the human sense of hearing. The response time is a maximum of 2 seconds. The Sound Sensor is suitable for wall mounting and has a weatherproof housing that is also designed for outdoor use. The device is particularly interesting for companies, authorities or research institutions that require continuous monitoring of noise sources, for example in production facilities, traffic controls or urban noise projects.... Read More |