| Description | AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of chemical filtration may be recommended.
Features - Polypropylene construction for excellent chemical resistant properties. The result - "NO MORE RUST" which allows for longer service compared to standard metal enclosures
- Wide range of activated carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particulate
- AirZone™ baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, removing "dead spots" within the enclosure
- No ducting required
- Integral vapor-proof fluorescent lighting
- No installation costs. All AirClean® Systems bench-top hoods are shipped completely assembled (filters installed) and ready to use
- Available in 110V or 220V AC versions
- New 36" deep models available!
... Read More | Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that could be used for other critical laboratory manipulations.
The AirClean® Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that could be used for other critical laboratory manipulations.
The AirClean® Systems 200 Series Rotary Evaporator Enclosure is designed for use with Heidolph* and Büchi* Rotary Evaporator models.
Features - Microprocessor controller — constantly monitors airflow
- Gas detector monitors and alerts when filter change is necessary
- Integral base with deep spill lip
- Application specific construction materials
- Extremely quiet operation <49 dB
- Horizontal sliding access doors for easy operation of rotary evaporator
- No ducting required
- Space-saving design (38”W x 24”D)
- Safely encloses rotary evaporator, vacuum pump and waste bottle
- Simple bonded carbon filter replacement — no dust!
... Read More | AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
AirClean® Systems AirMax™ total exhaust polypropylene AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are standard bypass design. The standard bypass AirMax™ exhausts a constant volume of air, regardless of sash position.
A microprocessor controller monitors face velocity and displays the real-time airflow on the LCD screen in linear feet per minute.
Features - Flame-retardant polypropylene seamless interior
- Vertical sliding safety glass sash
- Variety of base cabinets available to compliment each AirMax™
- AirMax™ microprocessor controller
- Built-in vapor-proof fluorescent light
- Easy-access utilities panel for operation and maintenance
- All contact surfaces are constructed of polypropylene - “NO MORE RUST”!
- Flame-retardant polypropylene interior - higher temperature working range than fiberglass
- Non-hydroscopic - won’t absorb moisture
- Large volume spill basin with solid work surface
Safety Features - AirMax™ fume hoods have an advanced airfoil design that is important to the overall safety and performance of the fume hood. The rolled entry design incorporated into each AirMax™ hood prevents reverse flow and eddy currents from escaping the fume hood.
- AirMax™ exhaust hoods have a double sidewall construction which allows mounting of services and outlets on the posts.
- Containment of spills and heavy gases are easy with the AirMax™ total exhaust fume hood. A removable work surface exposes a spill basin that may be fitted with a drain for disposal of any spills.
- The rear baffle extends below the work surface to effectively remove any heavy gases or evaporation from a spill.
... Read More | AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate andAirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of chemical filtration may be recommended.
Features - Polypropylene construction for excellent chemical resistant properties. The result - "NO MORE RUST" which allows for longer service compared to standard metal enclosures
- Wide range of activated carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particulate
- AirZone™ baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, removing "dead spots" within the enclosure
- No ducting required
- Integral vapor-proof fluorescent lighting
- No installation costs. All AirClean® Systems bench-top hoods are shipped completely assembled (filters installed) and ready to use
- Available in 110V or 220V AC versions
- New 36" deep models available!
... Read More | AirClean® Systems economical single walled polypropylene fume hood is ideal for industrial applications where a ductless hood, workstation or enclosure is not appropriate and a full hood exhaust system is needed. These units are provided with a folding sash and vapor-proof fluorescent light. AirClean® Systems economical single walled polypropylene fume hood is ideal for industrial applications where a ductless hood, workstation or enclosure is not appropriate and a full hood exhaust system is needed. These units are provided with a folding sash and vapor-proof fluorescent light. The single walled design provides maximum work area for a fume hood of this size.
AirZone™ baffling within the total exhaust fume hood allows for a predictable and effective airflow pattern to capture toxic chemical fumes and vapors. The thermally fused seamless design provides a built-in work base that will effectively contain liquids and provide excellent chemical resistance.
Features - Polypropylene fume hood means corrosion-resistant construction
- Single wall design allows for maximum work space
- Economical solution for many industrial applications
- Low cost folding sash may be customized for various height requirements
- Available with single or dual exhaust duct connections.
- Internal baffling eliminates dead zones and provides for smooth airflow
- Seamless construction allows for easy cleaning
- Vapor-proof fluorescent light
- Optional airflow monitor for constant alphanumeric readout of airflow
- Polypropylene base cabinets available in vented and non-vented models
... Read More |