| Description | Designed to provide a low cost chemical hood solution for protection of the operator and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications. Smaller in Designed to provide a low cost chemical hood solution for protection of the operator and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications. Smaller in size, it makes an excellent portable fume hood for the classroom or laboratory.
Standard Features - AirSafe™ automatic safety controller
- Integral base with deep spill lip
- No ducting required
- Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49db="" />
- All thermoplastic construction with application specific sash, base and enclosure material
- Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
- UL, CSA and CE listed
Safety Features - The chemical fume hood filter and electronics are located above the work area, eliminating the chance of a chemical spill entering these sensitive areas.
- The brushless, sparkless motor is post-filter.
- The deep base effectively contains accidental spills.
- The low airflow alarm warns user both visually and audibly.
- Filter safety lockout to ensure correct filter replacement.
... Read More | Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that could be used for other critical laboratory manipulations.
The AirClean® Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that could be used for other critical laboratory manipulations.
The AirClean® Systems 200 Series Rotary Evaporator Enclosure is designed for use with Heidolph* and Büchi* Rotary Evaporator models.
Features - Microprocessor controller — constantly monitors airflow
- Gas detector monitors and alerts when filter change is necessary
- Integral base with deep spill lip
- Application specific construction materials
- Extremely quiet operation <49 dB
- Horizontal sliding access doors for easy operation of rotary evaporator
- No ducting required
- Space-saving design (38”W x 24”D)
- Safely encloses rotary evaporator, vacuum pump and waste bottle
- Simple bonded carbon filter replacement — no dust!
... Read More | AirClean® Systems polypropylene free-standing recirculating fume hoods are designed to accommodate applications that require additional vertical height not found in standard benchtop hoods. Typically floor mounted, each E-Series recirculating fume hood features an upper folding sash combined AirClean® Systems polypropylene free-standing recirculating fume hoods are designed to accommodate applications that require additional vertical height not found in standard benchtop hoods. Typically floor mounted, each E-Series recirculating fume hood features an upper folding sash combined with lower access doors, providing easy ergonomic access during manipulation. Full access design allows equipment to be easily inserted or removed from the enclosure, making the E-Series perfect for use with mixers, mills, grinders, reactors, or other tall equipment.
Features - AirSafe™ automatic safety controller
- Wide range of activated bonded carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, or particulate
- Polypropylene construction for excellent chemical resistance
- Full access for equipment loading and application viewing
- Integral vapor-proof fluorescent lighting
- No installation costs. All AirClean® Systems hoods are shipped fully assembled (filters installed) and ready to use
- No ducting required
- Available in 110V or 220V AC versions
... Read More | AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of chemical filtration may be recommended.
Features - Polypropylene construction for excellent chemical resistant properties. The result - "NO MORE RUST" which allows for longer service compared to standard metal enclosures
- Wide range of activated carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particulate
- AirZone™ baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, removing "dead spots" within the enclosure
- No ducting required
- Integral vapor-proof fluorescent lighting
- No installation costs. All AirClean® Systems bench-top hoods are shipped completely assembled (filters installed) and ready to use
- Available in 110V or 220V AC versions
- New 36" deep models available!
... Read More |