| Description | Designed to provide a low cost chemical hood solution for protection of the operator and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications. Smaller in Designed to provide a low cost chemical hood solution for protection of the operator and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications. Smaller in size, it makes an excellent portable fume hood for the classroom or laboratory.
Standard Features - AirSafe™ automatic safety controller
- Integral base with deep spill lip
- No ducting required
- Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49db="" />
- All thermoplastic construction with application specific sash, base and enclosure material
- Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
- UL, CSA and CE listed
Safety Features - The chemical fume hood filter and electronics are located above the work area, eliminating the chance of a chemical spill entering these sensitive areas.
- The brushless, sparkless motor is post-filter.
- The deep base effectively contains accidental spills.
- The low airflow alarm warns user both visually and audibly.
- Filter safety lockout to ensure correct filter replacement.
... Read More | Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that could be used for other critical laboratory manipulations.
The AirClean® Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that could be used for other critical laboratory manipulations.
The AirClean® Systems 200 Series Rotary Evaporator Enclosure is designed for use with Heidolph* and Büchi* Rotary Evaporator models.
Features - Microprocessor controller — constantly monitors airflow
- Gas detector monitors and alerts when filter change is necessary
- Integral base with deep spill lip
- Application specific construction materials
- Extremely quiet operation <49 dB
- Horizontal sliding access doors for easy operation of rotary evaporator
- No ducting required
- Space-saving design (38”W x 24”D)
- Safely encloses rotary evaporator, vacuum pump and waste bottle
- Simple bonded carbon filter replacement — no dust!
... Read More | AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate andAirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of chemical filtration may be recommended.
Features - Polypropylene construction for excellent chemical resistant properties. The result - "NO MORE RUST" which allows for longer service compared to standard metal enclosures
- Wide range of activated carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particulate
- AirZone™ baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, removing "dead spots" within the enclosure
- No ducting required
- Integral vapor-proof fluorescent lighting
- No installation costs. All AirClean® Systems bench-top hoods are shipped completely assembled (filters installed) and ready to use
- Available in 110V or 220V AC versions
- New 36" deep models available!
... Read More | AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of chemical filtration may be recommended.
Features - Polypropylene construction for excellent chemical resistant properties. The result - "NO MORE RUST" which allows for longer service compared to standard metal enclosures
- Wide range of activated carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particulate
- AirZone™ baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, removing "dead spots" within the enclosure
- No ducting required
- Integral vapor-proof fluorescent lighting
- No installation costs. All AirClean® Systems bench-top hoods are shipped completely assembled (filters installed) and ready to use
- Available in 110V or 220V AC versions
- New 36" deep models available!
... Read More | AirClean® Systems economical single walled polypropylene fume hood is ideal for industrial applications where a ductless hood, workstation or enclosure is not appropriate and a full hood exhaust system is needed. These units are provided with a folding sash and vapor-proof fluorescent light. AirClean® Systems economical single walled polypropylene fume hood is ideal for industrial applications where a ductless hood, workstation or enclosure is not appropriate and a full hood exhaust system is needed. These units are provided with a folding sash and vapor-proof fluorescent light. The single walled design provides maximum work area for a fume hood of this size.
AirZone™ baffling within the total exhaust fume hood allows for a predictable and effective airflow pattern to capture toxic chemical fumes and vapors. The thermally fused seamless design provides a built-in work base that will effectively contain liquids and provide excellent chemical resistance.
Features - Polypropylene fume hood means corrosion-resistant construction
- Single wall design allows for maximum work space
- Economical solution for many industrial applications
- Low cost folding sash may be customized for various height requirements
- Available with single or dual exhaust duct connections.
- Internal baffling eliminates dead zones and provides for smooth airflow
- Seamless construction allows for easy cleaning
- Vapor-proof fluorescent light
- Optional airflow monitor for constant alphanumeric readout of airflow
- Polypropylene base cabinets available in vented and non-vented models
... Read More |