| Description | AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
AirClean® Systems AirMax™ total exhaust polypropylene AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are standard bypass design. The standard bypass AirMax™ exhausts a constant volume of air, regardless of sash position.
A microprocessor controller monitors face velocity and displays the real-time airflow on the LCD screen in linear feet per minute.
Features - Flame-retardant polypropylene seamless interior
- Vertical sliding safety glass sash
- Variety of base cabinets available to compliment each AirMax™
- AirMax™ microprocessor controller
- Built-in vapor-proof fluorescent light
- Easy-access utilities panel for operation and maintenance
- All contact surfaces are constructed of polypropylene - “NO MORE RUST”!
- Flame-retardant polypropylene interior - higher temperature working range than fiberglass
- Non-hydroscopic - won’t absorb moisture
- Large volume spill basin with solid work surface
Safety Features - AirMax™ fume hoods have an advanced airfoil design that is important to the overall safety and performance of the fume hood. The rolled entry design incorporated into each AirMax™ hood prevents reverse flow and eddy currents from escaping the fume hood.
- AirMax™ exhaust hoods have a double sidewall construction which allows mounting of services and outlets on the posts.
- Containment of spills and heavy gases are easy with the AirMax™ total exhaust fume hood. A removable work surface exposes a spill basin that may be fitted with a drain for disposal of any spills.
- The rear baffle extends below the work surface to effectively remove any heavy gases or evaporation from a spill.
... Read More | Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that could be used for other critical laboratory manipulations.
The AirClean® Operator exposure to chemical fumes and vapors has long been a concern when using the rotary evaporator. Many laboratories simply place the rotary evaporator into a standard exhaust hood, which takes up valuable space, that could be used for other critical laboratory manipulations.
The AirClean® Systems 200 Series Rotary Evaporator Enclosure is designed for use with Heidolph* and Büchi* Rotary Evaporator models.
Features - Microprocessor controller — constantly monitors airflow
- Gas detector monitors and alerts when filter change is necessary
- Integral base with deep spill lip
- Application specific construction materials
- Extremely quiet operation <49 dB
- Horizontal sliding access doors for easy operation of rotary evaporator
- No ducting required
- Space-saving design (38”W x 24”D)
- Safely encloses rotary evaporator, vacuum pump and waste bottle
- Simple bonded carbon filter replacement — no dust!
... Read More | AirMax, with wet fume scrubber, is a total solution for minimizing personnel, ductwork and environmental exposure to caustic acid gases. Contaminated air passes through the scrubber’s water-washed contact media before being exhausted. The water used during the scrubbing process is captured in the AirMax, with wet fume scrubber, is a total solution for minimizing personnel, ductwork and environmental exposure to caustic acid gases. Contaminated air passes through the scrubber’s water-washed contact media before being exhausted. The water used during the scrubbing process is captured in the holding tank and recirculated. An optional pH dosing system can be added to neutralize acids captured during the scrubbing process.... Read More | AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate andAirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of chemical filtration may be recommended.
Features - Polypropylene construction for excellent chemical resistant properties. The result - "NO MORE RUST" which allows for longer service compared to standard metal enclosures
- Wide range of activated carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particulate
- AirZone™ baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, removing "dead spots" within the enclosure
- No ducting required
- Integral vapor-proof fluorescent lighting
- No installation costs. All AirClean® Systems bench-top hoods are shipped completely assembled (filters installed) and ready to use
- Available in 110V or 220V AC versions
- New 36" deep models available!
... Read More | AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and AirClean® Systems polypropylene laboratory hoods allow for a wide range of applications. Each polypropylene hood is designed to accommodate up to 7 inches of filtration. By stacking a HEPA filter, followed by a bonded carbon filter, the operator can effectively remove both toxic particulate and chemical fumes. For high evaporation or multiple chemical applications, a full 7 inch stack of chemical filtration may be recommended.
Features - Polypropylene construction for excellent chemical resistant properties. The result - "NO MORE RUST" which allows for longer service compared to standard metal enclosures
- Wide range of activated carbon, impregnated chemisorptive, and HEPA filters for containment of virtually any toxic vapor, fume, gas, and particulate
- AirZone™ baffling establishes a proper horizontal airflow pattern and directs toxins away from the operator in a predictable pattern, removing "dead spots" within the enclosure
- No ducting required
- Integral vapor-proof fluorescent lighting
- No installation costs. All AirClean® Systems bench-top hoods are shipped completely assembled (filters installed) and ready to use
- Available in 110V or 220V AC versions
- New 36" deep models available!
... Read More |