| Description | Introducing our range of carefully tailored Simultaneous Thermal Analyzers, each designed to meet different customer needs:
- The STA 509 Jupiter® Series increases productivity with an integrated color display to start pre-programmed measurements. Its LED light bar displays instrument status
Introducing our range of carefully tailored Simultaneous Thermal Analyzers, each designed to meet different customer needs:
- The STA 509 Jupiter® Series increases productivity with an integrated color display to start pre-programmed measurements. Its LED light bar displays instrument status using color-coded indicators to allow monitoring of instrument status without a PC.
- The STA 509 Jupiter®’s modular design, with interchangeable furnaces and sensors, adapts to different applications with temperatures ranging from -150°C to 2400°C, providing versatility for both industrial and academic needs.
- The vacuum-tight design and meticulous gas flow control enable precise handling of high purity atmospheres, including inert, oxidizing, reducing, and corrosive gases. The top-loading, electronically compensated setup provides optimal performance and ease of use, making it the ideal choice for flexible analytical systems and evolved gas analysis.
- The integration of a nanogram balance and high-performance heat flux DSC ensures exceptional accuracy with minimal drift and unparalleled flexibility for handling high sample loads.
- Electronic heat stabilization and Eco Mode improve efficiency and ensure peak performance while significantly reducing energy and gas consumption, resulting in sustainability and significant savings.
- A variety of sample holders expand the range of applications. Integrating evolved gas analysis with MS, FT-IR, or GC-MS further enhances the analytical capabilities of the STA 509 Jupiter®.
... Read More | Opening a New World of Cure Monitoring
Customized Test Conditions
The multi-functional design of the DEA 288 Ionic allows for the application of a great variety of different test conditions such as heat, cold or UV light. This enables the user to easily and conveniently determine the best Opening a New World of Cure Monitoring
Customized Test Conditions
The multi-functional design of the DEA 288 Ionic allows for the application of a great variety of different test conditions such as heat, cold or UV light. This enables the user to easily and conveniently determine the best parameters for processing the material.
A complete dielectric analyzer consists of the DEA electronics and a sensor. Disposable sensors are connected via an adaptor box. Four models of DEA 288 Ionic are available: the regular laboratory version and the slim version with small footprint and two industrial versions.
Both instruments are equipped with the same state-of-the-art electronics and have the ability to control additional accessories such as the lab furnace or lab press. The technical differences between the devices are in the design of the housing, the footprint and the maximum number of channels.
Features:
- Frequency range: 1 mHz to 1 MHz, freely selectable values
-
Data acquisition multiple DEA modules: True simultaneous operation of all channels
-
Minimum data acquisition time: < 5 ms
-
Sensor connection: Shielded 4-wire technique (compensation of resistivity and capacity of the wire as a prerequisite for precise measurements)
-
DEA modules:
- Portable Version: All-purpose version, up to 7 channels
-
Industrial Rack Version: up to 8 channels (extension possible for up to 16 channels)
-
I/O Ports: Input and output of measuring signals or signals from peripheral devices such as pressure or temperature sensors. DEA allows for triggering by manufacturing machines
... Read More | The testing instrument DMA 503 Eplexor® up to ±500 N enables the dynamic mechanical (or static) characterization of a wide range of different materials including elastomers and polymers, composites, metals, glasses, ceramics, biomaterials, foods, adhesives, and liquids.
The modular design of the The testing instrument DMA 503 Eplexor® up to ±500 N enables the dynamic mechanical (or static) characterization of a wide range of different materials including elastomers and polymers, composites, metals, glasses, ceramics, biomaterials, foods, adhesives, and liquids.
The modular design of the high-force DMA systems allows for measurements in the tension, compression, bending, and shearing modes. The testing machines in this series differ from each other mainly in terms of their maximum dynamic force ranges of ±100 N, ±150, N, and ±500 N.
Various add-on options make these testing machines a safe investment for the long term.
- Flexible and set for the future
... using a variety of forces and strain sensors as well as furnaces which allow for easy upgrades to the basic system at any time after the first installation.
- High force levels
...allowing for static loads up to 1500 N and dynamic loads up to ± 500 N; significant for investigations on curable resins, elastomers, composites, metals, glasses, or ceramics.
- Two independent drives
...featuring a servo motor for static and a shaker for dynamic loads.
- Interchangeable force sensors
...which can be easily changed out by the operator; nominal loads available ranging from ±10 N to ±2500 N.
- 24/7 operation via the Automatic Sample Changer
...for tension, compression, and bending samples across the entire temperature range around the clock.
- Optimized for temperature sweeps on large samples
...thanks to uniform heating of even large samples with low thermal conductivity (e.g., large rubber specimens).
- Highly economic LN2 cooling
...for low liquid nitrogen consumption.
Accessories
- Sample holders for a variety of applications
...from liquids via reinforced thermosets to metals and ceramics - all materials can be investigated with the DMA 503 Eplexor®.
- Humidity Generator (HYGROMATOR®)
...add-on investigates the water uptake of samples such as plastics and biopolymers. With the humidity generator, it is possible to create relative humidity values of between 5% and 95% in the temperature range between 5°C and 95°C.
- Immersion Bath
...even for measurements in the tension, compression, and bending mode; for the investigation of aging or plasticizer effects caused by contact with water or oil.
- Cooling options
...two different cooling systems are available including liquid nitrogen cooling to -160°C and air chiller to -60°C to use with the standard furnace.
... Read More | A Highly Reliable and Fully Equipped Cost-Saving Instrument Package
The STA 2500 Regulus is a highly reliable and fully equipped top-loading differential balance ideal for standard STA measurements with frequently changing temperature programs available at an excellent price.
Excellent Cost A Highly Reliable and Fully Equipped Cost-Saving Instrument Package
The STA 2500 Regulus is a highly reliable and fully equipped top-loading differential balance ideal for standard STA measurements with frequently changing temperature programs available at an excellent price.
Excellent Cost Performance
The STA 2500 Regulus features a highly reliable, fully equipped instrument package for STA measurements up to 1600°C at an attractive price.
Top-Loading and Unique Differential Balance Arrangement
The natural gas flow in the top-loading system guarantees automatic protection of the balance against condensation and contamination. The tailor-made differential balance system cancels out buoyancy and convection influences over a broad temperature range. This provides easy operation without the need for timeconsuming baseline runs.
Various Atmospheres Available
Measurements can be performed in inert and oxidizing atmospheres but also under vacuum. The atmosphere can be dynamic or static. The built-in mass flow controllers (MFCs) are software-controlled and allow gas changes at any time during the test.
Ideal for Evolved Gas Analysis
The top-loading design of the STA allows for convenient coupling to gas analysis systems such as FT-IR (Fourier Transform Infrared) spectrometer, MS (mass spectrometer), or GC-MS (gas chromatograph – mass spectrometer). During thermal treatment, the gases evolved can be simultaneously analyzed.... Read More | The STA 319 Jupiter® is part of NETZSCH's Jupiter® range of STAs and offers several advantages:
- Temperature range of 10°C (RT) to 1025°C (or up to 1100°C): ideal for polymer, life science and inorganic measurements.
- Robust water-cooled ceramic furnace for fast heating and cooling.
The STA 319 Jupiter® is part of NETZSCH's Jupiter® range of STAs and offers several advantages:
- Temperature range of 10°C (RT) to 1025°C (or up to 1100°C): ideal for polymer, life science and inorganic measurements.
- Robust water-cooled ceramic furnace for fast heating and cooling.
- Advanced top-loading microbalance: Provides an impressive 20-ng resolution for long-term, high-quality measurements.
- Revolutionary ring sample holder design: eliminates the need for a standard reference crucible. Enables quick setup and minimizes handling errors.
- Defined atmospheric conditions thanks to vacuum-tight design.
- Coupling to gas analysis enables real-time identification of the composition of evolved gases.
... Read More |