| Description | Highly accurate Pressure Gauge / Threaded connection: M20 x 1.5 mm / Long-life battery / 3.1 inch LCD display
Our highly accurate Pressure Gauge is a precise and reliable solution for measuring gas and liquid pressures in industry, laboratories and technology. With a measuring range of -0.088 MPa ..Highly accurate Pressure Gauge / Threaded connection: M20 x 1.5 mm / Long-life battery / 3.1 inch LCD display
Our highly accurate Pressure Gauge is a precise and reliable solution for measuring gas and liquid pressures in industry, laboratories and technology. With a measuring range of -0.088 MPa ... +2.5 MPa and a high resolution of 0.0001 MPa, our high-precision Pressure Gauge is ideal for applications that require maximum measurement accuracy. The accuracy is 0.05 % FS, which guarantees stable and repeatable measurement results.
Our high-accuracy Pressure Gauge uses a diffused silicon pressure sensor and offers intelligent calibration and linearity correction functions. The zero point is set quickly and precisely within two seconds using a magnetic pin. This ensures consistently high measuring accuracy and reliability. The response time is just 0.5 seconds, allowing rapid pressure changes to be reliably recorded. The device is equipped with a 3.1 inch LC display, which is easy to read and has a backlight.
The wetted parts are made of stainless steel, making our highly accurate Pressure Gauge suitable for air, water and non-aggressive oils. The connection is made via an M20 × 1.5 thread. Overload protection up to 1.2 times the maximum pressure range reliably protects the sensor from short-term pressure peaks. With a housing diameter of 112 mm and a weight of just 601 g, the device is space-saving and easy to install. The device supports ten selectable pressure units: bar, psi, kPa, MPa, Pa, inHg, mmHg, inH2O, mmH2O and kgf/cm2, which ensures maximum flexibility for different requirements.
For data transmission, our high-precision pressure measuring device uses an RS-485 interface with the Modbus RTU communication protocol. Thanks to its low power consumption, the integrated lithium battery achieves a service life of more than three years in 24-hour operation.
The highly accurate pressure measuring device is ideal for the precise measurement of gas and liquid pressures in various areas such as industrial production, hydraulic systems, water and waste water technology as well as in laboratory applications. It is particularly suitable for applications that require high accuracy and reliability and can be used for monitoring pressure systems in non-aggressive media. However, the temperature of the media should not exceed 85 °C to ensure optimum performance of the device.... Read More | Gauss Meter / Tesla Meter transversal probe / Measurement in A/cm, Gauss or Tesla / Graphical display of pulse fields / Touch screen / Wireless interface for Windows, iOS and Android
Experience the revolution in measurement technology with the Gauss Meter / Tesla Meter. This device belongs to the Gauss Meter / Tesla Meter transversal probe / Measurement in A/cm, Gauss or Tesla / Graphical display of pulse fields / Touch screen / Wireless interface for Windows, iOS and Android
Experience the revolution in measurement technology with the Gauss Meter / Tesla Meter. This device belongs to the new generation of powerful magnetic field measuring devices and uses external digital axial and transverse field probes to carry out precise magnetic field measurements of DC, AC and pulsed magnetic fields of all kinds.
It is ideally suited as a digital gaussmeter, magnetometer or tesla meter for recording and analyzing magnetic field strength, magnetic field intensity and magnetic flux density. The highly sensitive magnetic field sensors ensure reliable magnetic measurement. The application range of this Gauss Meter / Tesla Meter extends from weak geomagnetic fields to strong fields with field strengths of up to 40,000 A/cm. This makes it ideal for a wide range of applications in industrial magnetic field measurement, magnetic field analysis, magnetic flux measurement, magnetic field line analysis and various magnetic field test procedures. The Gauss Meter / Tesla Meter provides you with professional magnetic field measurement solutions at the highest level, which are developed and manufactured in Germany for users. The Gauss Meter / Tesla Meter has a graphic LCD touch panel with innovative user guidance and a resolution of 320 × 480 pixels. As a highly developed digital magnetic field meter, it offers functions that go far beyond classic magnetic field measurement. An outstanding feature of the new probe electronics is the fast digitization of the measured values with a frequency of up to 200 kHz. This enables precise magnetic measurement and the display of pulse curves with a duration of just 0.1 milliseconds. This makes the device ideal for analyzing magnetic fields and precisely recording magnetic field intensity and field strength in pulse fields.
These magnetic field sensors ensure high accuracy and make the device a reliable instrument. Maximum values and pulse durations are displayed exactly - a great advantage for all applications where magnetic field measurement or flux measurement is crucial. In addition, alternating field curves with frequencies of up to 20 kHz can also be recorded and saved - an important function for demanding magnetic field test procedures in industrial magnetic field measurement. This precise analysis allows the magnetic flux density to be measured and - in combination with the magnetic field line analysis - a comprehensive picture of the field conditions can be obtained. Whether as a magnetometer, tesla meter or specialized solution - the magnetic field measuring device stands for innovative magnetic field measuring solutions "Made in Germany" and sets standards among magnetic field measuring devices. An absolutely interference-free and precise measurement is crucial, especially at very low magnetic field strengths. The measuring electronics of the magnetic field meter work directly in the probe, digitize the signals of the Hall sensor and are therefore a central component of modern magnetic field sensors.
This technology enables high-precision magnetic measurement methods and ensures reliable detection of even weak fields. It forms the basis for professional measurements, especially for recording minimal magnetic field intensities as part of sophisticated analyses. In the area of stable DC fields, the scan function of the device enables the area-wide detection of a magnetic field, which can then be statistically analysed. This makes it ideal for magnetic field line analysis and magnetic flux measurement. This function significantly expands the possibilities of modern magnetic field measurement systems. Pulse fields can be displayed graphically and thus provide an accurate picture of the course of a magnetic field pulse - an important basis for precise measurements, the evaluation of magnetic field intensity and for advanced measurement methods. These features make it a versatile device for professional applications - whether as a digital gaussmeter, magnetometer or teslameter.
Thanks to the wireless interface, data can be transferred to a Windows PC as well as to Android and iOS apps. We therefore offer a modern solution for mobile magnetic field measuring systems. The ability to flexibly save and evaluate measurements supports complex magnetic field analyses - for example to determine field strength, intensity or flux density. The device can be continuously supplied with power via the USB interface. An SCPI interface is also implemented, via which it can be remotely controlled in line operation - ideal for automated magnetic field test procedures. With a magnetic field meter (also known as a magnetometer, gaussmeter or teslameter), you can detect even the smallest differences in magnetic field strength. This precise measurement enables the detection of very low field values - from minimal residual magnetic fields just above the earth's magnetic field to peak values with high flux density.
The device is durable and always delivers reproducible measurement results. It is ideal for a wide range of applications in industrial magnetic field measurement, flux measurement, magnetic field analysis and magnetic field line analysis. We also offer a calibration standard (reference magnet) with which you can check the accuracy of your magnetic field meter at any time - an indispensable component for standardised measurement solutions in laboratories, development and production. Our systems are among the most reliable magnetic field measuring devices in Germany and fulfil the highest demands on modern test procedures and measuring methods.... Read More | The Metal Detector / Metal Finder combines state-of-the-art technology with high precision and versatile functions. The device has several operating modes, including All Metal (AM) for detecting all metals and Filter Mode (DM), which can be used to specifically mask out unwanted types of metal. The Metal Detector / Metal Finder combines state-of-the-art technology with high precision and versatile functions. The device has several operating modes, including All Metal (AM) for detecting all metals and Filter Mode (DM), which can be used to specifically mask out unwanted types of metal. Seven customizable scene modes enable optimal adaptation to different environments. With the PINPOINT function, objects can be located precisely, which significantly increases the efficiency of the search.
Thanks to a powerful 4000 mAh lithium battery, the Metal Detector / Metal Finder offers an operating time of over 12 hours and is therefore ideal for longer search operations. The easy-to-read LCD display provides clear visual information, while integrated speakers or the headphone connection enable acoustic detection. Thanks to the wireless function, the sound can be transmitted directly to compatible headphones, allowing convenient use without any annoying cables.
The Metal Detector / Metal Finder's extensive setting options include an adjustable threshold value, adjustable pitch and customizable sensitivity from 1 to 99. The manual ground balance ensures reliable results even in challenging search areas. With its robust construction and precise detection, this Metal Detector / Metal Finder is the ideal choice for treasure hunters and professional users who value accuracy and efficiency.
... Read More | Highly accurate Pressure Meter / Threaded connection: M20 x 1.5 mm / Long-life battery / 3.1 inch LCD display
Our highly accurate Pressure Meter is a precise and reliable solution for measuring gas and liquid pressures in industry, laboratories and technology. With a measuring range of -0.088 MPa ..Highly accurate Pressure Meter / Threaded connection: M20 x 1.5 mm / Long-life battery / 3.1 inch LCD display
Our highly accurate Pressure Meter is a precise and reliable solution for measuring gas and liquid pressures in industry, laboratories and technology. With a measuring range of -0.088 MPa ... +1.6 MPa and a high resolution of 0.0001 MPa, our high-precision Pressure Meter is ideal for applications that require maximum measuring accuracy. The accuracy is 0.05 % FS, which guarantees stable and repeatable measurement results. The device supports ten selectable pressure units: bar, psi, kPa, MPa, Pa, inHg, mmHg, inH2O, mmH2O and kgf/cm2, ensuring maximum flexibility for different requirements.
Our highly accurate Pressure Meter works with a diffused silicon pressure sensor and offers intelligent calibration and linearity correction functions. The zero point is set quickly and precisely within two seconds using a magnetic pen. This ensures consistently high measuring accuracy and reliability. The response time is just 0.5 seconds, allowing rapid pressure changes to be reliably recorded. The device is equipped with a 3.1 inch LCD display, which is easy to read and has a backlight.
The wetted parts are made of stainless steel, making our highly accurate Pressure Meter suitable for air, water and non-aggressive oils. The connection is made via an M20 × 1.5 thread. Overload protection up to 1.2 times the maximum pressure range reliably protects the sensor from short-term pressure peaks. With a housing diameter of 112 mm / 4.4 in and a weight of just 601 g / 1.3 lb, the device is space-saving and easy to install.
Our high-precision pressure measuring device uses an RS-485 interface with the Modbus RTU communication protocol for data transmission. Thanks to its low power consumption, the integrated lithium battery achieves a service life of more than three years in 24-hour operation.
The highly accurate pressure measuring device is ideal for the precise measurement of gas and liquid pressures in various areas such as industrial production, hydraulic systems, water and waste water technology as well as in laboratory applications. It is particularly suitable for applications that require high accuracy and reliability and can be used for monitoring pressure systems in non-aggressive media. However, the temperature of the media should not exceed 85°C / 185°F to ensure optimum performance of the device.... Read More | Thickness Gauge with the unique swivelling probe / Easy measurements in hard-to-reach places / For FE metals / Wireless interface for Windows, iOS and Android
The Thickness Gauge works with a measuring probe that only requires a small contact surface and low contact pressure. The compact device is Thickness Gauge with the unique swivelling probe / Easy measurements in hard-to-reach places / For FE metals / Wireless interface for Windows, iOS and Android
The Thickness Gauge works with a measuring probe that only requires a small contact surface and low contact pressure. The compact device is barely larger than a measuring probe and is particularly suitable for measuring thin layers on uneven or complex surfaces, such as tin cans. The swiveling probe enables simple measurements even in hard-to-reach places. The handy metal housing is splash-proof to IP64 for interference-free measurements in harsh environments. The device is also optionally available with flowing water protection. For a long service life with frequent use on rough surfaces, the measuring probe has a wear-resistant ruby probe pole.
Thanks to the one-button operation and intuitive, multilingual menu navigation, the Thickness Gauge is particularly user-friendly. A Thickness Gauge is mainly used in the quality assurance of coating processes - for example to determine the paint thickness on vehicles, steel structures or fire protection components such as steel doors. In addition to paintwork, rubber coatings, anodized and galvanic coatings can also be reliably measured.
The device is specially designed for iron and steel substrates. It works with a magnetic-inductive probe and reliably measures layers of paint, varnish, plastic, rubber, ceramic, galvanization and galvanic coatings (except nickel) in accordance with ISO 2178. The device can be connected wirelessly to Android and iOS mobile devices as well as Windows PCs for further processing of your measurement data. The free "Lima Connect" app allows you to manage projects, assign measuring points to photos and statistically analyze and graphically display the results.
... Read More |