| Description | Numerous specialized digital probes can be connected to the Automotive Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. Special functions such as scan measurement for rough surfaces and duplex Numerous specialized digital probes can be connected to the Automotive Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. Special functions such as scan measurement for rough surfaces and duplex measurement for galvanized and additionally coated steel extend the performance spectrum.
The newly developed digital probe technology enables extremely stable measurement values thanks to a high sampling rate. The measurement signals are digitized directly in the probe for interference-free and precise recording, which leads to particularly accurate and reproducible results. The magnetic induction method of this Automotive Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanization and galvanic coatings on steel. The eddy current method can be used to measure insulating coatings such as paint, varnish, plastic or anodized coatings on non-ferrous metals.
The device has a graphic LCD touch panel with innovative user guidance and a resolution of 320 × 480 pixels. The menu navigation is in German and English, other language packages are optionally available. A protective silicone frame reliably protects the housing from external influences.
The flexibly structured measured value memory and freely definable calibration configurations of the Automotive Tester offer a wide range of options for customized data acquisition. Measured values can be transferred directly to devices with Windows, Android or iOS via a wireless interface. An SCPI interface is also integrated, which can be used to operate the measuring device remotely in line operation. The connection is made via USB, which also enables power supply and continuous operation.
The integrated scan function allows rough surfaces to be scanned with subsequent statistical evaluation. An analogue bar graph display supplements the numerical measured values and enables trends or deviations to be identified quickly. The duplex function simultaneously measures the individual layer thicknesses of insulating coatings on galvanized steel (only in conjunction with the DX52-D or DX52-DP probes).
Power is supplied either via three AA batteries or via an external USB source, which means that operation with a power adapter or power bank is also possible.... Read More | Numerous specialized digital probes can be connected to the Automotive Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. Special functions such as scan measurement for rough surfaces and duplex Numerous specialized digital probes can be connected to the Automotive Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. Special functions such as scan measurement for rough surfaces and duplex measurement for galvanized and additionally coated steel extend the performance spectrum.
The newly developed digital probe technology enables extremely stable measurement values thanks to a high sampling rate. The measurement signals are digitized directly in the probe for interference-free and precise recording, which leads to particularly accurate and reproducible results. The magnetic induction method for this Automotive Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanization and galvanic coatings on steel. The eddy current method can be used to measure insulating coatings such as paint, varnish, plastic or anodized coatings on non-ferrous metals.
The device has a graphic LCD touch panel with innovative user guidance and a resolution of 320 × 480 pixels. The menu navigation is in German and English, other language packages are optionally available. A protective silicone frame reliably protects the housing from external influences.
The flexibly structured measured value memory and freely definable calibration configurations offer a wide range of options for customized data acquisition. Measured values can be transferred directly to devices with Windows, Android or iOS via a wireless interface. An SCPI interface is also integrated, which can be used to operate the Automotive Tester remotely in line operation. The connection is made via USB, which also enables power supply and continuous operation.
The integrated scan function allows rough surfaces to be scanned with subsequent statistical evaluation. An analogue bar graph display supplements the numerical measured values and enables trends or deviations to be identified quickly. The duplex function simultaneously measures the individual layer thicknesses of insulating coatings on galvanized steel (only in conjunction with the DX52-D or DX52-DP probes).
Power is supplied either via three AA batteries or via an external USB source, which means that operation with a mains adapter or power bank is also possible.... Read More | Coating Thickness Gauge with integrated measuring probe (Ø 2 mm measuring surface) / In accordance with Basler standard DIN EN ISO 8249 / Wireless interface and app connection / OLED display / Multilingual menu.
The Coating Thickness Gauge has an illuminated and high-contrast OLED display on which Coating Thickness Gauge with integrated measuring probe (Ø 2 mm measuring surface) / In accordance with Basler standard DIN EN ISO 8249 / Wireless interface and app connection / OLED display / Multilingual menu.
The Coating Thickness Gauge has an illuminated and high-contrast OLED display on which the measured values are shown in FN and Fe%. The ferrite content measurement is particularly important for welded duplex steels in order to determine whether the weld seam contains sufficient ferrite content to guarantee its strength. If insufficient heat is applied or the weld area cools down too quickly, the ferrite content may be too low.
The ferrite content can be determined precisely and quickly using the Coating Thickness Gauge. In order to recognize the weld seam on smooth or polished surfaces, the ferrite content meter can be switched to continuous measurement. While the probe is moved over the surface, the Coating Thickness Gauge continuously stores measured values and displays the statistics with minimum, maximum and average value after the probe is lifted.
The ferrite content meter is supplied with three calibration standards that are traceably calibrated to the NIST standard. For further processing of your measurement data, you can connect the Coating Thickness Gauge wirelessly to mobile Android or iOS devices as well as to a Windows PC. This is made possible by the integrated wireless technology. The free Lima Connect app can be used to manage projects and assign measuring points to photos. The measurement results can be statistically analyzed and graphically displayed.
... Read More | Numerous specialized digital probes can be connected to the Material Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. Special functions such as scan measurement for rough surfaces and duplex Numerous specialized digital probes can be connected to the Material Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. Special functions such as scan measurement for rough surfaces and duplex measurement for galvanized and additionally coated steel extend the performance spectrum.
The newly developed digital probe technology with the Material Tester enables extremely stable measurement values thanks to a high sampling rate. The measurement signals are digitized directly in the probe for interference-free and precise recording, which leads to particularly accurate and reproducible results. The magnetic induction method allows measurements of paint, varnish, plastic, rubber, ceramics, galvanization and galvanic coatings on steel. The eddy current method can be used to measure insulating coatings such as paint, varnish, plastic or anodized coatings on non-ferrous metals.
The device has a graphic LCD touch panel with innovative user guidance and a resolution of 320 × 480 pixels. The menu navigation is in German and English, other language packages are optionally available. A protective silicone frame reliably protects the housing from external influences.
The flexibly structured measured value memory and freely definable calibration configurations offer a wide range of options for customized data acquisition. Measured values can be transferred directly to devices with Windows, Android or iOS via a wireless interface. An SCPI interface is also integrated, which can be used to operate the Material Tester remotely in line operation. The connection is made via USB, which also enables power supply and continuous operation.
The integrated scan function allows rough surfaces to be scanned with subsequent statistical evaluation. An analogue bar graph display supplements the numerical measured values and enables trends or deviations to be identified quickly. The duplex function simultaneously measures the individual layer thicknesses of insulating coatings on galvanized steel (only in conjunction with the DX52-D or DX52-DP probes).
Power is supplied either via three AA batteries or via an external USB source, which means that operation with a power adapter or power bank is also possible.... Read More | The Metal Detector / Metal Finder combines state-of-the-art technology with high precision and versatile functions. The device has several operating modes, including All Metal (AM) for detecting all metals and Filter Mode (DM), which can be used to specifically mask out unwanted types of metal. The Metal Detector / Metal Finder combines state-of-the-art technology with high precision and versatile functions. The device has several operating modes, including All Metal (AM) for detecting all metals and Filter Mode (DM), which can be used to specifically mask out unwanted types of metal. Seven customizable scene modes enable optimal adaptation to different environments. With the PINPOINT function, objects can be located precisely, which significantly increases the efficiency of the search.
Thanks to a powerful 4000 mAh lithium battery, the Metal Detector / Metal Finder offers an operating time of over 12 hours and is therefore ideal for longer search operations. The easy-to-read LCD display provides clear visual information, while integrated speakers or the headphone connection enable acoustic detection. Thanks to the wireless function, the sound can be transmitted directly to compatible headphones, allowing convenient use without any annoying cables.
The Metal Detector / Metal Finder's extensive setting options include an adjustable threshold value, adjustable pitch and customizable sensitivity from 1 to 99. The manual ground balance ensures reliable results even in challenging search areas. With its robust construction and precise detection, this Metal Detector / Metal Finder is the ideal choice for treasure hunters and professional users who value accuracy and efficiency.
... Read More |