| Description | The Cary 3500 Flexible UV-Vis is a double-beam spectrophotometer with superior photometric performance—for challenging measurements with minimal sample preparation—that can be deployed in regulated environments. The system offers a uniquely large sample compartment with a small footprint for The Cary 3500 Flexible UV-Vis is a double-beam spectrophotometer with superior photometric performance—for challenging measurements with minimal sample preparation—that can be deployed in regulated environments. The system offers a uniquely large sample compartment with a small footprint for analyzing liquid samples that require long-length cuvettes, as well as characterizing solid samples. A xenon flash lamp—complete with a 10-year replacement warranty (for Cary 3500 instruments purchased from Agilent or participating partners)—eliminates the daily warm-up time and drastically reduces the frequency and cost of lamp replacement.
The Cary 3500 comes complete with Cary UV Workstation software—a next-generation analytical platform with streamlined methods for wavelength reads, scanning, concentration, kinetics, and temperature measurements. When configured with Agilent OpenLab data management software, Cary UV Workstation data is managed, protected, and stored in a local or central secure database.
Features
- Measure liquid samples via unique variable pathlength rectangular and cylindrical cell holders, which enable quick and reproducible pathlength changes up to 10 cm. This design is toolless and eliminates time-consuming alignment procedures.
- Handle a wide variety of solid samples and thin films with a large sample compartment that accommodates most sample sizes while minimizing its footprint on the lab bench.
- Ensure you never miss a data point—even in rapid reaction kinetics measurements—with advanced xenon flash lamp technology achieving a data collection rate of 250 points per second.
- Achieve research-grade photometric performance, stability, and high linear dynamic range with minimal sample preparation.
- Reduce data processing time and calculation errors with more than 50 built-in and customized calculations that can be saved and applied automatically to any method used routinely.
- Be up and running in minutes by following the intuitive video tutorials in Cary UV Workstation’s Help and Learning Center.
- Meet data integrity standards—provides the technical controls to acquire securely, process, report, and store data in laboratories that must follow the compliance guidelines of FDA 21 CFR Part 11, EU Annex 11, GAMP5, as well as ISO/IEC 17025 and EPA’s 40 CFR Part 160.
- Store and manage your Cary 3500 Flexible UV-Vis spectrophotometer data in a local secured storage on the workstation PC, or in a central storage location.
- Deploy the OpenLab software suite and get optional secure database storage for electronic records, complete user administration and access privileges, software licensing, and security settings—e-signature workflow and enhanced audit trail review capabilities.
... Read More | The Cary 3500 Compact UV-Vis is a double-beam spectrophotometer featuring new and unique measurement capabilities that can be deployed in regulated environments. The system performs ambient and temperature-controlled experiments with air-cooled Peltier temperature control, and it accurately analyzesThe Cary 3500 Compact UV-Vis is a double-beam spectrophotometer featuring new and unique measurement capabilities that can be deployed in regulated environments. The system performs ambient and temperature-controlled experiments with air-cooled Peltier temperature control, and it accurately analyzes low-volume samples—providing in-depth analysis by collecting up to 250 data points per second. The xenon flash lamp—complete with a 10-year replacement warranty (for Cary 3500 instruments purchased from Agilent or participating partners)—eliminates the daily warm-up time and drastically reduces the frequency and cost of lamp replacement.
The Cary 3500 comes complete with Cary UV Workstation software—a next-generation analytical platform with streamlined methods for wavelength reads, scanning, concentration, kinetics, and temperature measurements. When configured with Agilent OpenLab data management software, Cary UV Workstation data is managed, protected, and stored in a local or central secure database.
Features
- Perform accurate and quick temperature-controlled experiments from 0 to 110 °C using a unique and fully integrated air-cooled Peltier system.
- Control the experimental temperature from inside the cuvette using highly accurate, solid-state digital Cary temperature probes with thermal ramp rate up to 40 °C/min.
- Ensure accurate analysis of small-volume measurements with a highly collimated and uniform beam of less than 1.5 mm width, coupled with permanent optical alignment of the stationary cell holders.
- Reduce data processing time and calculation errors with more than 50 built-in and customized calculations that can be saved and applied automatically to any method used routinely.
- Achieve research-grade photometric performance, stability, and range with a double-beam spectrophotometer featuring leading optical technologies.
- Be up and running in minutes by following the intuitive video tutorials in Cary UV Workstation’s Help and Learning Center.
- Meet data integrity standards—provides the technical controls to acquire securely, process, report, and store data in laboratories that must follow the compliance guidelines of FDA 21 CFR Part 11, EU Annex 11, GAMP5, as well as ISO/IEC 17025 and EPA’s 40 CFR Part 160.
- Store and manage your Cary 3500 Compact UV-Vis spectrophotometer data in a local secured storage on the workstation PC, or in a central storage location.
- Deploy the OpenLab software suite and get optional secure database storage for electronic records, complete user administration and access privileges, software licensing, and security settings—e-signature workflow and enhanced audit trail review capabilities.
... Read More | The Cary 3500 Multicell UV-Vis is a double-beam spectrophotometer offering new, unique measurement capabilities that can be deployed in regulated environments. The system simultaneously measures up to four independent temperature experiments across eight cuvette positions, with air-cooled Peltier The Cary 3500 Multicell UV-Vis is a double-beam spectrophotometer offering new, unique measurement capabilities that can be deployed in regulated environments. The system simultaneously measures up to four independent temperature experiments across eight cuvette positions, with air-cooled Peltier temperature control. A xenon flash lamp—complete with a 10-year replacement warranty (for Cary 3500 instruments purchased from Agilent or participating partners)—eliminates the daily warm-up time and drastically reduces the frequency and cost of lamp replacement. You can also accurately monitor kinetic experiments with a data collection rate of up to 250 points per second.
The Cary 3500 comes complete with Cary UV Workstation software—a next-generation analytical platform with streamlined methods for wavelength reads, scanning, concentration, kinetics, and temperature measurements. When configured with Agilent OpenLab data management software, Cary UV Workstation data is managed, protected, and stored in a local or central secure database.
Features
- Measure samples at four temperatures across eight cuvette positions in a single experiment and collect data from each cuvette simultaneously.
- Control the temperature of your samples accurately and quickly from 0 to 110 °C without water, noise, or messy cables using a unique and fully integrated air-cooled Peltier system.
- Control UV-Vis thermal ramp measurements at up to 40 °C/min using highly accurate, solid-state digital Cary temperature probes that control the experimental temperature from inside the cuvette.
- Ensure analytical accuracy for small-volume measurements with a highly collimated and uniform beam of less than 1.5 mm width, coupled with permanent optical alignment of the stationary cell holders.
- Reduce data processing time and calculation errors with more than 50 built-in and customized calculations that can be saved and applied automatically to any method used routinely.
- Achieve research-grade photometric performance, stability, and range with a double-beam spectrophotometer featuring leading optical technologies.
- Be up and running in minutes by following the intuitive video tutorials in Cary UV Workstation’s Help and Learning Center.
- Meet data integrity standards—provides the technical controls to acquire securely, process, report, and store data in laboratories that must follow the compliance guidelines of FDA 21 CFR Part 11, EU Annex 11, GAMP5, as well as ISO/IEC 17025 and EPA’s 40 CFR Part 160.
- Store and manage your Cary 3500 Multicell UV-Vis spectrophotometer data in a locally secured storage on the workstation PC, or a central storage location.
- Deploy the OpenLab software suite and get optional secure database storage for electronic records, complete user administration and access privileges, software licensing, and security settings—e-signature workflow and enhanced audit trail review capabilities.
... Read More | The Cary 5000 is a high-performance UV-Vis and NIR spectrophotometer with superb photometric performance in the 175–3300 nm range. Using a PbSmart detector, the Cary 5000 extends its NIR range to 3300 nm making it a powerful tool for materials science research. The Cary WinUV software, a modular The Cary 5000 is a high-performance UV-Vis and NIR spectrophotometer with superb photometric performance in the 175–3300 nm range. Using a PbSmart detector, the Cary 5000 extends its NIR range to 3300 nm making it a powerful tool for materials science research. The Cary WinUV software, a modular Windows-based software, makes it easy to perform powerful analysis and control a number of optional accessories.
The large sample compartment can be expanded to hold large accessories and integrating spheres for spectral and diffuse reflectance. The LockDown mechanism makes it possible to quickly change and position accessories for reproducible results.
Features - Measure beyond 8.0 absorbance units with reference beam attenuation
- Measure 175 to 3300 nm using a PbSmart NIR detector for extended photometric range
- WinUV software—modular software with power analysis and enhanced transfer and report export capabilities
- Versatile set of accessories for materials research including spectral and diffuse reflectance
- Variable slit widths (down to 0.01 nm) for optimum control over data resolution
- Large sample compartment with LockDown mechanism for quick changes and positioning for reproducible results
- Maximum light throughput using Schwarzchild coupling optics for higher accuracy at low transmission levels
- Minimal noise and stray light using a floating aluminum casting and double Littrow monochromator
- Extended dynamic range by attenuating the reference beam to balance double beam signal levels.
- Nitrogen purging—separate purging in the sample and monochromator compartments to reduce oxygen and water vapor in the ultra-violet.
... Read More | The Cary 60 UV-Vis spectrophotometer has a wavelength range of 190–1100 nm that can be scanned in under three seconds. Our flexible UV-Vis system can be fitted with long pathlength cuvettes and solid sample transmission or reflectance accessories, and is ideal for remote UV-Vis absorbance analysis, The Cary 60 UV-Vis spectrophotometer has a wavelength range of 190–1100 nm that can be scanned in under three seconds. Our flexible UV-Vis system can be fitted with long pathlength cuvettes and solid sample transmission or reflectance accessories, and is ideal for remote UV-Vis absorbance analysis, when fitted with fiber optic probes.
The xenon source lamp has a 10 year replacement warranty (for Cary 60 instruments purchased from Agilent or participating partners), requires zero warmup, and causes no photodegradation of samples. Fast reactions can be recorded with 80 data points per second. The Cary 60 is well-suited as a routine UV-Vis spectrophotometer or for use in teaching labs. Optional 21 CFR Part 11 software tools are available.
Features - Reduce time-consuming and expensive lamp replacements, and minimize instrument revalidation costs with the unique Agilent xenon source lamp.
- Safely measure life-science samples without sample photodegradation and ensure you get the correct answer every time with the Cary 60 UV-Vis spectrophotometer.
- Get reliable UV-Vis spectrophotometer performance with fiber-optic measurement probes. Why use cuvettes when you can bring the UV-Vis instrument to the sample and get accurate results in a fraction of the time?
- Measure small volumes and precious samples accurately and reproducibly with a highly focused beam image.
- Scan the entire wavelength range (190 to 1100 nm) in under three seconds and collect data from single or multiple wavelengths at 80 data points per second.
- Take advantage of the Cary 60 UV-Vis spectrophotometer’s comprehensive range of accessories to accurately characterize the widest variety of liquid and solid samples.
- Tailor the Cary WinUV software to suit your analytical requirements. From classroom to research laboratories through R&D and regulated QA/QC environments, simplify your UV-Vis spectroscopy measurements and finish more in less time.
- Choose sustainability: The Cary 60 UV-Vis received My Green Lab’s ACT (Accountability, Consistency, Transparency) label after an independent audit for its environmental impact throughout the product lifecycle.
... Read More |