| Description | The Miniflex XpC is an X-ray diffractometer designed specifically for quality control in cement plants and other operations requiring online process control such as pharmaceuticals and batteries. It has been optimized for speed and accuracy, bringing lab-quality performance to the manufacturing The Miniflex XpC is an X-ray diffractometer designed specifically for quality control in cement plants and other operations requiring online process control such as pharmaceuticals and batteries. It has been optimized for speed and accuracy, bringing lab-quality performance to the manufacturing floor.
With this in mind, the MiniFlex XpC allows you to process more samples faster, and to gain greater control over your process to ensure consistent quality of your final product. The system is characterized by streamlined operation, rapid analysis with pass/fail evaluation and the ability to automate and integrate with other complementary analytical instruments. The MiniFlex XpC offers the performance level of much larger systems, in the world’s smallest footprint for an online XRD.
Features:
Analytical speed and accuracy are paramount in industrial operations. These factors have been addressed in the design of the MiniFlex XpC by using: - A newly design compact, 800 W high-flux X-ray source and power supply
- World’s largest area/high-throughput 1D detector, enabling higher-intensity data collection
- Optimized θ / θ sample geometry that maintains a horizontal sample orientation
- Streamlined user interface
- Compatibility with sample loading robots or conveyors
- Compact design that can easily be incorporated into existing operations
- A recently patented variable-width scattering slit minimizing background at lower angles
- Sample spinner that negates the effects of preferred orientation
- Uses industry standard steel ring sample holders
Streamlined Operation
In addition to sample loading automation, Rigaku has introduced EasyX, a simplified user interface that allows operators of any skill level to measure and obtain results in as few as three clicks. Built on the same comprehensive platform that underpins Rigaku’s most sophisticated XRDs like the SmartLab, EasyX provides simplified access to the functionalities required for routine QC workflows, including automated pass/fail analysis. A user-friendly graphical user interface accessible via the optional touchscreen allows simple operation of the instrument as well as interpretation of the results.
Compact Design
The MiniFlex XpC has the smallest footprint (0.9 m2) of any instrument in its class. This specification includes the touchscreen user interface.
Online Quality Control
A newly developed sample loader makes the MiniFlex XpC ideal for QC operations. For applications with higher-throughput levels, the system can be integrated with a sample loading robot or a conveyor.... Read More | The AutoMATE II can measure large and heavy parts (30 kg with standard manual Z stage; 20 kg with optional automated XYZ stage) with high accuracy.
The X-ray source and detector arm are mounted on a highly accurate two-axis goniometer that can position them relative to the measurement site and The AutoMATE II can measure large and heavy parts (30 kg with standard manual Z stage; 20 kg with optional automated XYZ stage) with high accuracy.
The X-ray source and detector arm are mounted on a highly accurate two-axis goniometer that can position them relative to the measurement site and perform scans with minimum steps of 0.1 microns when using the automated XYZ stage.
Features: - Highly accurate goniometer allows for true micro-area residual stress measurement.
- Automatic mapping measurements with teaching function.
- An X-ray radiation enclosure with interlock system automatically locks the enclosure door when the X-ray shutter is open.
- The measurement position is adjusted by _x000B_a CCD camera equipped with a microscope having a zoom function.
- The two-axis goniometer system allows for both iso-inclination _x000B_and side-inclination methods automatically without readjustment of the sample position.
... Read More | The SmartLab high-resolution diffraction system represents the state of the art in fully automated modular XRD systems. The system incorporates a high resolution theta/theta closed loop goniometer drive system, CBO, an in-plane scattering arm, an optional 9.0 kW rotating anode generator, and a fullyThe SmartLab high-resolution diffraction system represents the state of the art in fully automated modular XRD systems. The system incorporates a high resolution theta/theta closed loop goniometer drive system, CBO, an in-plane scattering arm, an optional 9.0 kW rotating anode generator, and a fully automated optical system to make advanced measurements possible for both expert and novice users of the system.
Winner of the 2006 R&D 100 Award for technical innovation, the SmartLab is design for completely automated analysis of thin films and other advanced materials. Powered by Guidance, Rigaku's revolutionary knowledge based software package, SmartLab uses fully deveopled measurement packages for completely automated measurement of thin films, nanomaterials, powders, and liquids. Measurement packages exist for powder diffraction, glancing incidence diffraction, in-plane diffraction, X-ray reflectivity, and small angle X-ray scattering (SAXS) measurements.
Features - Θ/Θ design for horizontal sample mounting
- Closed loop drive system for high resolution scanning
- Optional 9.0 kW rotating anode generator
- Fully automatic system alignment
- Guidance software based automated measurement
- 300 mm wafer handling
- CBO for focusing and parallel beam geometries without reconfiguration
- In-plane diffraction arm for in-plane measurements without reconfiguration
- High resolution optics
- SAXS capabilities
... Read More | One source with two high-flux wavelengths is the foundation of the revolutionary XtaLAB Synergy-DW single crystal X-ray diffractometer. It combines the increased flux of a rotating anode X-ray source with the flexibility of two different wavelengths, making it ideal for laboratories exploring a wideOne source with two high-flux wavelengths is the foundation of the revolutionary XtaLAB Synergy-DW single crystal X-ray diffractometer. It combines the increased flux of a rotating anode X-ray source with the flexibility of two different wavelengths, making it ideal for laboratories exploring a wide range of research interests.
The XtaLAB Synergy-DW diffractometer is based on the proven, low-maintenance MicroMax-007 HF microfocus rotating anode. The target is constructed with two different X-ray source materials (Cu and Mo) and is coupled with an auto-switching dual wavelength optic. Copper or molybdenum X-ray radiation is available at the click of a button. The XtaLAB Synergy-DW offers up to 12x higher flux compared to the standard sealed tube X-ray sources and, utilizing only one generator, means overall maintenance is reduced.
Rounding out the XtaLAB Synergy-DW configuration is the fast and efficient four-circle kappa goniometer which is compatible with a wide range of detectors including the HyPix-6000HE and other Hybrid Photon Counting (HPC) X-ray detectors e.g. PILATUS and EIGER detectors.
Features: - TAccess to two wavelengths in one compact system
- 12x higher flux than sealed tube X-ray sources
- Low maintenance, high performance system
- Uses CrysAlisPro software with both PX and SMX modes
- Multi-functional diffractometer to cover you wherever your research takes you
- High flux performance means you all your crystallography needs can be carried out ‘in-house’
- Very little downtime and easy maintenance
- No need to purchase extra software for different applications
... Read More | The XtaLAB Synergy-ED is the world’s first 3DED/microED (3D Electron Diffraction/micro Electron Diffraction) system and the successful culmination of a joint development project between Rigaku and JEOL. 3DED/microED allows crystallographers to probe the structure of crystals and The XtaLAB Synergy-ED is the world’s first 3DED/microED (3D Electron Diffraction/micro Electron Diffraction) system and the successful culmination of a joint development project between Rigaku and JEOL. 3DED/microED allows crystallographers to probe the structure of crystals and nanocrcrystals as small as tens of nanometers, opening up many new possibilities. This new capability allows you to go beyond the limitations of X-ray diffraction (XRD), which requires samples greater them 1 µm.
- Directly determine 3D molecular structures of submicron crystals for the first time
- Rigaku’s high-speed, high-sensitivity photon counting detector - HyPix-ED
- JEOL’s expertise in generation and control of stable electron beams – 200 kV electron source and optics
- Rigaku’s powerful single crystal analysis software – CrysAlisPro-ED
3DED/microED is an excellent complementary technique to XRD, and the compact design of the XtaLAB Synergy-ED allows it to be easily located in laboratories alongside these instruments. Crystallographers familiar with Rigaku diffractometers running CrysAlisPRO will be able to adapt to the CrysAlisPRO-ED interface very quickly, as it is based on the same intuitive platform.
The fully integrated system incorporates a seamless workflow from data collection to structure determination of three-dimensional molecular structures. AutoChem, which is fully integrated into CrysAlisPRO, performs fast, fully automated structure solution and refinement during data collection, optimizing your productivity.
3DED/microED allows direct structural determination of sub-micron sized crystals that could only previously be postulated by techniques such as NMR. As an emerging technique, there is scope for the generation of many publications using the XtaLAB Synergy-ED.
... Read More |