| Description | At the heart of the LP980 is a fully integrated and sophisticated transient absorption spectrometer. It uses the pump-probe technique for measuring transient kinetics and sepctra. In kinetic mode (K) a single point detector is used to measure the transient kinetics at a single wavelength (spectra At the heart of the LP980 is a fully integrated and sophisticated transient absorption spectrometer. It uses the pump-probe technique for measuring transient kinetics and sepctra. In kinetic mode (K) a single point detector is used to measure the transient kinetics at a single wavelength (spectra can be built up by automated scanning over a wavelength range and slicing the data). In spectral mode (S) a gated intensified CCD is used to capture the whole spectrum in the presence and absence of the pump laser pulse, meaning the whole spectrum can be generated after one laser pulse. The LP980 spectrometer has a dual sample chamber that enables users to reliably and accurately measure transient chemical and biological species up to 2.55 µm using the pump-probe technique AND laser-induced fluorescence lifetimes down to nanosecond time ranges.
Transverse sample excitation geometry comes as standard. Thin-film, diffuse reflection, fluorescence and phosphorescence lifetime measurement accessories are available as options.... Read More | The FLS1000 Spectrometer sets the standard in both steady state and time-resolved photoluminescence spectroscopy for both fundamental research and routine laboratory applications.
The system is a modular fluorescence and phosphorescence spectrometer for measuring spectra from the ultraviolet to The FLS1000 Spectrometer sets the standard in both steady state and time-resolved photoluminescence spectroscopy for both fundamental research and routine laboratory applications.
The system is a modular fluorescence and phosphorescence spectrometer for measuring spectra from the ultraviolet to the mid-infrared spectral range (up to 5,500 nm), and lifetimes spanning from picoseconds to seconds. All of this can be achieved through various upgrade routes, either at the time of order or in the future.
Whether you are studying photophysics, photochemistry, biophysics, biochemistry, material or life sciences, the FLS1000 will enable you to reliably and accurately measure luminescence spectra and kinetics using state-of-the-art sources, detectors, acquisition techniques, quality optics and precision mechanics. The large sample chamber will house practically any type of sample accessory.
High sensitivity is a prerequisite for measurements of low sample concentrations, small sample volumes or low sample quantum yields. The instrument’s guaranteed sensitivity of >35,000:1 for the standard water Raman measurement using the SQRT method is unmatched in the industry.
The FL1000 has a USB interface and all modes of operation are controlled by ONE data acquisition module and ONE all-inclusive Fluoracle software package for data acquisition and analysis. Light source, detector, grating, slits, polarisers are all computer-controlled for accurate and precise measurements.
Features: - New Fluoracle® software package – easily accessible user interface and updated features
- Higher Resolution – new 325 mm focal length monochromators provide superb accuracy and excellent stray light rejection with minimum step size
- Faster measurements – increased scan speeds and leading performance
- Increased automation – ease of use for even the most complex configurations
... Read More | Compact high-sensitivity spectrofluorometer; FS5 v2 is adaptable to a wide range of research and analytical applications.
Features:
- High Sensitivity: Photon counting detection, with a signal-to-noise ratio of 12,000:1, provides exceptional sensitivity for the detection of weak fluorescence signals
Compact high-sensitivity spectrofluorometer; FS5 v2 is adaptable to a wide range of research and analytical applications.
Features:
- High Sensitivity: Photon counting detection, with a signal-to-noise ratio of 12,000:1, provides exceptional sensitivity for the detection of weak fluorescence signals
-
2-in-1 Spectrometer: Measure both absorption and fluorescence spectra in a single instrument
-
Adaptable: Tailor to your requirements, from a dedicated spectral fluorometer to an all-in-one characterisation platform with time-resolved fluorescence and quantum yield
-
Plug & Play Sample Modules: Auto-recognised sample modules that can be swapped in seconds, enabling a rapid transition between different sample formats and measurement types
-
Near-Infrared Detection: Extend the measurement range out to 2050 nm by adding a NIR detector, ideal for studying NIR-emitters, such as quantum dots and upconversion nanoparticles
-
Automated Acquisition: Maximise your lab productivity with the FluoAuto software feature to create automated sample measurement sequences
... Read More | The IR5 is a high-performance benchtop Fourier Transform Infrared (FTIR) spectrometer from the trusted Edinburgh Instruments brand.
The IR5 is the perfect choice for analytical and research applications such as polymer, semiconductor, and pharmaceutical samples, offering simple operation as well The IR5 is a high-performance benchtop Fourier Transform Infrared (FTIR) spectrometer from the trusted Edinburgh Instruments brand.
The IR5 is the perfect choice for analytical and research applications such as polymer, semiconductor, and pharmaceutical samples, offering simple operation as well as fast and accurate results. IR absorption, transmission, reflectance, and infrared photoluminescence can all be measured in the IR5 using only one software package, Miracle™.
Key Features
- Outstanding Performance – High sensitivity and spectral resolution
- Photoluminescence – Fourier Transform Photoluminescence
upgrade with a choice of laser source
- Configurable – Option for a second detector giving
higher sensitivity at selected spectral ranges
- User-friendly – Simple to operate and suitable for all user levels,
from beginner to advanced
- Maintenance-Free – No maintenance required with moisture
control technology
- Miracle Software – Modern, powerful and intuitive software
designed specifically for the IR5
... Read More | The Mini-tau is an ultra-compact, low cost, filter-based fluorescence lifetime spectrometer for lifetimes ranging from 25 ps to 50 µs*. Using the Time-Correlated Single Photon Counting (TCSPC) technique, the Mini-tau is supplied with our F980 software and a USB connected TCC2 electronics module to The Mini-tau is an ultra-compact, low cost, filter-based fluorescence lifetime spectrometer for lifetimes ranging from 25 ps to 50 µs*. Using the Time-Correlated Single Photon Counting (TCSPC) technique, the Mini-tau is supplied with our F980 software and a USB connected TCC2 electronics module to enable fast, reliable, and accurate measurement and data analysis.... Read More |