WaterPro PS Polishing Systems from Labconco

Description

WaterPro PS Polishing Systems deliver Type I, 18.2 megohm-cm ultrapure water from a dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute. Available in four purity configurations: General Chemistry (TOC <10 ppb), Analytical Instrument (TOC <5 ppb), Life Science (pyrogen-free, TOC <10 ppb), and Hybrid (TOC <5 ppb, pyrogen-free). Wall-mountable polishing stations with automatic recirculation loop. Require RO-quality feedwater.

Product Details
ItemWaterPro PS Polishing Systems
CompanyLabconco
PriceGet Quote
Flow Rate1.8 liters per minute (typical)
Resistivity18.2 megohm-cm
Output1.8 liters per minute (typical, depending on feedwater flow rate, pressure, and installed purification modules)
MethodIon exchange polishing; UV lamp with UV flush valve (Life Science and Hybrid models); ultrafiltration (Life Science and Hybrid models); TOC dump valve (Analytical Instrument and Hybrid models); automatic/intermittent recirculation through polishing loop
MotorQuiet 1/4 hp rotary vane recirculation pump
Total Organic Carbon (TOC)< 10 ppb (General Chemistry and Life Science models); < 5 ppb (Analytical Instrument and Hybrid models with TOC dump valve)
Water TypeType I
Resistivity Value18.2 MO·cm
Toc Value< 10 ppb (General Chemistry / Life Science models); < 5 ppb (Analytical Instrument / Hybrid models)
MountingWall-mountable; optional mobile stand or support stand available
Feed Water QualityRO-quality feedwater required; recommended use with WaterPro RO Station. Tap water with conductivity =50–70 µS/cm may not require RO pretreatment. Performance chart shows PS polishing cartridge capacity based on feedwater conductivity.
Purification TechnologiesIon exchange polishing (all models); UV lamp + UV flush valve (Life Science and Hybrid models); ultrafiltration (Life Science and Hybrid models); TOC dump valve (Analytical Instrument and Hybrid models); recirculation loop (all models)
Dispense OptionsDispensing valve (standard) or dispensing gun (optional)
Materials Of ConstructionType 304 stainless steel front panel; unpigmented virgin natural polypropylene bowls
Model ConfigurationsFour purity configurations: (1) Type I, TOC <10 ppb — General Chemistry; (2) Type I, TOC <5 ppb — Analytical Instrument; (3) Type I, TOC <5 ppb & Pyrogen-Free — Hybrid; (4) Type I, TOC <10 ppb & Pyrogen-Free — Life Science. Each available in valve or gun dispense, and 115V or 230V electrical.
Water Quality MonitoringWater quality alert LED flashes actual megohm-cm reading when water quality falls below set point
Timed DispenseYes — timed dispense feature allows unattended dispensing; system shuts off automatically when user-set time elapses