WaterPro RO Systems from Labconco

Product Details
ItemWaterPro RO Systems
CompanyLabconco
PriceGet Quote
Flow Rate1.1 L/min (valve dispense); 8.7 L/min (gravity-fed from storage tank)
MethodReverse Osmosis (RO)
OutputUp to 1.1 L/min (dispensing from valve); 8.7 L/min gravity-fed from 17 L storage tank
ResistivityMonitored via conductivity LED display (1–999 µS); no resistivity spec stated for RO output (Type III water)
ApplicationsReagent preparation; glassware rinsing; feedwater for Labconco WaterPro PS Polishing Station; connection to Labconco SteamScrubber, FlaskScrubber, and FlaskScrubber Vantage Series Washers
Water TypeType III (ASTM Type III–IV)
Feed Water QualityTap water; Temperature 5–40°C (41–104°F); pH 4–10; Pressure 30–100 psi (2–7 bar); Minimum inlet flow rate 1.6 gal/min (6 L/min); Maximum Silt Density Index 5 SDI; Turbidity =1 NTU; Negative Langelier Saturation Index required (positive index requires water softener pretreatment)
Purification TechnologiesReverse Osmosis membrane; Prefilter; Carbon filter; Air vent filter (removes bacteria from storage tank vent); Automatic flush valve (extends RO membrane life)
ConstructionType 304 stainless steel front panel; powder-coated epoxy steel cabinet; 3/8" feedwater inlet and 3/8" drain port connections
MountingWall mountable (hardware included); optional support stand (31.1" W x 16.1" D x 35.3" H / 79.1 x 41.0 x 89.7 cm with unit attached); optional mobile stand also available
Timed DispenseTimed dispense from 0 to 99.9 minutes for unattended operation
Storage Tank17 L integral polyethylene storage tank; includes outlet port for 1/2" OD tubing for connection to polishing system or glassware washer
Filter BowlsThree large-capacity white polypropylene bowls with threaded heads (accommodates prefilter, carbon filter, and RO membrane — sold separately)
Conductivity MonitorTemperature-compensated conductivity LED display; range 1–999 µS/cm (microsiemens)
Internal Pressure GaugesTwo internal pressure gauges, 0–160 psi; RO membrane back-pressure relief valve preset to 150 psi
Motor Pump1/4 hp motor/rotary vane pump; operates at <56 dB; low-pressure switch and thermal overload shut-off
Automatic Flush ValveAutomatically flushes RO membrane and tank for 3 minutes after each 12-hour period of inactivity to extend membrane life
Ro Rejection Rate95% conductivity reduction (typical)
Drain RequirementDrain line capable of handling minimum 2 gal/min reject water flow